valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
• After setting, you can check the remained time per 1 minute by pressing [SLEEP]. NOTES: • When you disconnect the unit from the AC outlet or when a power failure occures, the sleep timer setting will be canceled. • To cancel the sleep timer, press [SLEEP] on the remote control repeatedly until "SLEEP 0" is displayed. • The Sleep Timer setting display will automatically disappear after 10 seconds. SLEEP 16 EN OTHER SETTINGS SWITCHING EXTERNAL INPUT When you connect external devices including a video cassette recorder and home audio system, you can easily switch the input mode with the remote control. INPUT SELECT CH CH VOL VOL CHANNEL RETURN–/ENT INPUT SELECT 321 654 98 +1000 7 MUTESLEEPMENU 1 Switch the input mode. • When you press [INPUT SELECT] on the remote control, the input mode will be switched as below. • To use the VIDEO-1 INPUT jacks on the rear of the TV, select "VIDEO1". (If you use the S-VIDEO jack, "S-VIDEO" is displayed.) • To use the jacks on the front of the TV, select "VIDEO2". • To use the COMPONENT VIDEO INPUT jacks on the rear of the TV, select "COMPONENT". • When you press [INFO], the current external input mode will be displayed at the top right of the screen. 1) When using VIDEO-1 INPUT jack VIDEO 1 2) When using VIDEO-2 INPUT jack 3) When using COMPONENT VIDEO INPUT jack 4) When using S-VIDEO INPUT jack VIDEO 2 OTHER COMPONENT S-VIDEO EN AUTO PRESET CH If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you need to perform AUTO PRESET CH again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires. CH K / L CH CH VOL VOL CHANNEL RETURN–/ENT INPUT SELECT 321 654 987 +1000 MUTESLEEPMENU VOL X MENU NOTE: • Make sure if the TV is connected to antenna or cable. When aerial antenna is connected, select “AUTO PRESET CH (TV)” or “(TV/DTV)” at step 3. When connected to CATV, select “AUTO PRESET CH (CATV)”. TV When scanning TV or CATV only 1 Select analog mode by pressing [DTV/TV]. 2 Display the MENU screen. • Press [MENU] on the remote control. The following MENU screen is displayed. PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] 3 Select "CHANNEL SET". • Using [CH K/L] on the remote control, select "CHANNEL SET". PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] • Press [VOL X] on the remote control. 4 *Only for TV channels • Using [CH K/L] on the remote control, select "AUTO PRESET CH(TV)". • Press [VOL on the remote control. Scanning and memorizing the channels auto- matically star AUTO PRESET CH(TV) ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(DTV/TV) • When the scanning and memorizing are completed, the memorized smallest channel in the analog broadcasting will be displayed. 4 *Only for CATV channels • Using [CH K/L] on the remote control, select "AUTO PRESET CH(CATV)". • Press [VOL on the remote control. Scanning and memorizing the channels auto- matically star AUTO PRESET CH(CATV) ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(DTV/TV) • When the scanning and memorizing are completed, the memorized smallest channel in the CATV will be displayed. EN DTV DTV DTV TV When scanning DTV only 1 Select digital mode by pressing [DTV/TV]. 2 Display the MENU screen. • Press [MENU] on the remote control. The following MENU screen is displayed. 3 Select "CHANNEL SET". • Using [CH K/L] on the remote control, select "CHANNEL SET". • Press [VOL X] on the remote control. 4 Using [CH K/L] on the remote control, select "AUTO PRESET CH(DTV)". • Press [VOL on the remote control. Scanning and memorizing the channels auto- matically star AUTO PRESET CH(DTV) ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(DTV/TV) • When the scanning and memorizing are completed, the memorized smallest channel in the digital broadcasting will be displayed. PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP When scanning both DTV and TV at the same time * You can access this menu from both modes (analog / digital). 1 Display the MENU screen and select ”CHANNEL SET". • Press [MENU] and select "CHANNEL SET" using [CH K/L] on the remote control. • Press [VOL X] on the remote control. 2 Using [CH K/L] on the remote control, select "AUTO PRESET CH(DTV/TV)". • Press [VOL on the remote control. Scanning and memorizing the channels auto- matically star AUTO PRESET CH(DTV/TV) ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(DTV/TV) • When the scanning and memorizing are completed, the memorized smallest channel in the analog broadcasting will be displayed. If no analog channel is memorized, the memorized smallest channel in the digital broadcasting will be displayed. NOTES: • If you press [POWER] or [MENU] on the remote control while setting AUTO PRESET CH, AUTO PRESET CH setting will be canceled. • If there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel ...