valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
NOTES: for TV RATING and MPAA RATING • You cannot access the setup menu when the "PROTECTED PROGRAM by ..." message appears. You need to move to an unblocked channel to access the setup menu. • When you select a rating and set it to "BLOCK", the higher ratings will be blocked automatically. The lower ratings will be available for viewing. • When you set the lowest rating to "VIEW", all other ratings will automatically be available for viewing. OPTIONAL SETTINGS TV RATING MPAA RATING CHANGE CODE EN C CHANGE CODE C CHANGE CODE 4 Display the "CHANGE CODE" screen. • Using [CH K/L], select "CHANGE CODE". TV RATING MPAA RATING CHANGE CODE • Press [VOL X]. 5 Change the access code. • Use Channel number buttons on the remote control and enter the NEW CODE (4-digit). • Enter code again in CONFIRM CODE box. NEW CODE _ _ _ _ CONFIRM CODE _ _ _ _ 6 To exit the menu, press [MENU]. NOTES: • Make sure to enter the exact same new code in the "CONFIRM CODE" space as one in the "NEW CODE" space. If they are different, the "NEW CODE" space is cleared for reentering. • Your personal access code will be erased and return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the code, unplug the power cord for 10 seconds to restore the access code to 0000. 26 EN DTV DTV CHANGING THE SCREEN DISPLAY MODE 2 types of display modes can be selected in the digi tal mode. You can select your favorite display mode and enjoy the program. CH K / L CH CH VOL VOL CHANNEL RETURN–/ENT INPUT SELECT 321 654 987 +1000 MUTESLEEPMENU VOL X / Y MENU 1 Display the menu screen. • Press [MENU]. The following menu screen is displayed. PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP 2 Select "DTV SET UP". • Using [CH K/L], select "DTV SET UP". PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] DTV SET UP • When you press [VOL X], the menu screen will be displayed as below. 3 Select the display mode. • Every time you press [VOL X/Y], "LETTERBOX" and "ZOOM" will be switched alternately. D10-0 D10-0 LETTERBOX ZOOM [LETTERBOX] Display the digital-supported program in full- screen. Black borders will spread in the upper and lower screen. [ZOOM] Enlarge and display the center area of the digital- supported program. The right and left side of image will be cut off. 4 To exit the menu, press [MENU]. NOTE: You may not switch the display mode depending on the program. OPTIONAL SETTINGS DTV DISPLAY [LETTERBOX] DTVCC D.S.T.[Daylight Saving] [ON] TIME ZONE [ALASKA] EN OTHER SETTINGS AUTO PRESET CH If you switch wires (e.g. between antenna and CATV) or if you move the TV to a different area after the initial setting, you will need to perform AUTO PRESET CH again. This function lets you easily select the receivable channels with [CH K/L] and the TV memorizes them even if you switch wires. CH K / L VOL X MENU CH CH VOL VOL CHANNEL RETURN–/ENT INPUT SELECT 321 654 987 +1000 MUTESLEEPMENU NOTE: • Make sure if the TV is connected to antenna or cable. When aerial antenna is connected, select “AUTO PRESET CH (TV)” or “(TV/DTV)” at step 4. When connected to CATV, select “AUTO PRESET CH (CATV)”. TV When scanning TV or CATV only 1 Select analog mode by pressing [DTV/TV]. 2 Display the menu screen. • Press [MENU]. The following menu screen is displayed. PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] 3 Select "CHANNEL SET". • Using [CH K/L], select "CHANNEL SET". PICTURE CHANNEL SET [ENG]/ESP/FRA V-CHIP SET UP CAPTION [OFF] • Press [VOL X]. 4 For TV channels • Using [CH K/L], select "AUTO PRESET CH(TV)". • Press [VOL matically star Scanning and memorizing the channels auto- AUTO PRESET CH(TV) ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min. • When the scanning and memorizing are completed, the memorized smallest channel in the analog broadcasting will be displayed. 4 For CATV channels • Using [CH K/L], select "AUTO PRESET CH(CATV)". • Press [VOL matically star Scanning and memorizing the channels auto- AUTO PRESET CH(CATV) ADD/DELETE AUTO PRESET CH(TV) AUTO PRESET CH(CATV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min. • When the scanning and memorizing are completed, the memorized smallest channel in the CATV will be displayed. 28 EN DTV DTV DTV TV When scanning DTV only 1 Select digital mode by pressing [DTV/TV]. 2 Display the menu screen. • Press [MENU]. The following menu screen is displayed. 3 Select "CHANNEL SET". • Using [CH K/L], select "CHANNEL SET". • Press [VOL X]. 4 Using [CH K/L], select "AUTO PRESET CH(DTV)". • Press [VOL Scanning and memorizing the channels auto- matically star AUTO PRESET CH(DTV) ADD/DELETE(DTV) AUTO PRESET CH(DTV) AUTO PRESET CH(TV/DTV) AUTO PRESET CH(CATV) ! CATV takes approx. 50min. • When the scanning and memorizing are completed, the memorized smallest channel in the digital broadcasting will be displayed. PICTURE CHANNEL SET [ENG]/ES...