valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Recording from digital channels to a DVCR is also a peer-to-peer connection. In this case, the TV is one of the devices in the peer-to peer connection. NOTE: Multiple peer-to-peer connections can occur simultaneously, sometimes with the same source device. Using TV Disc & A/V Discs TV Disc & A/V Disc Track List Screen Figure 15 When viewing the TV Disc or an A/V Disc, press GUIDE to display its Track List. The Channel, Station, Date, Time, Program name and whether it has been Watched (Y=yes, N=no) will be displayed. Tracks will be listed in date and time order and will vary in size. Press ADJUST or to navigate through the Track List. Press INFO to see the recording’s length and the amount of memory it will use. Free disc space is displayed in the title line. If the broadcaster has sent detailed information regarding the program, it will also display when you press INFO. To play a track, select it on the list, then press ENTER. To change pages, press CH or . To delete a track, select it on the list and press CANCEL. Press CANCEL again to confirm. IMPORTANT Analog programs cannot be transferred from the TV Disc and the TV Disc is not intended to act as permanent storage of digital recordings. Mitsubishi recommends you transfer important digital recordings to an external device such as a D-VHS VCR. Recordings stored on TV Disc are lost and cannot be recovered if the TV Disc requires replacement or repair. Mitsubishi is not liable for lost recordings. Figure 15. Track List screen for TV Disc TV Disc or A/V Disc Search NetCommand is able to search to a specific time in a recording on the TV Disc or an IEEE 1394 A/V Disc. 1. Start the desired track’s playback on the A/V disc. 2. Use the number buttons to enter the time code position of hours followed by minutes. For example, to enter one hour and twenty-two minutes (1:22) into the track, enter 1, 2, 2. 3. Press ENTER to skip to the time code position. 4. To cancel the request or to start over, press CANCEL instead of ENTER. Using the Remote Control with TV Disc or A/V Disc after selecting from the Device Selection menu: GUIDE: displays the Track List of recorded programs. PLAY: resumes playback of paused program. PAUSE: pauses or resumes playback of program. FF/FWD: forward picture search, multiple presses increase the speed. REW/REV: reverse picture search, multiple presses increase the speed. ADJUST : skip backward 12 seconds per press. ADJUST : skip forward 30 seconds per press. ADJUST : skip to the end of the track. ADJUST : skip to the beginning of the track. REC: Display the Record Menu to schedule recordings If the TV Disc is the default digital record device (Setup menu), you can also schedule recordings from ChannelView. Archiving TV Disc Digital Recordings To permanently store a COPY FREE digital recording from the TV Disc on D-VHS or other IEEE 1394 device: 1. Press DEVICE on the remote control and select TV Disc by pressing ADJUST , , or and then ENTER. 2. Press ADJUST or to select a track. Then press ENTER to start playing. 3. Press PAUSE to pause the playback. 4. Press REC (record) on the TV remote. The Record To screen will display. 5. In the “Record to” section, review the destination device (DVCR, VCR). Change if necessary. 6. Press REC a second time to initiate recording. 7. The TV Disc and destination device cannot be viewed or used while recording. To view a different device, press DEVICE and select. Direct VCR Recording from an Antenna or Cable Source, Copy-Protected Material and Restricitons for Traditional VCRs Direct VCR Recording from an Antenna or Cable Source: Pressing REC (record) on the TV’s remote control will function the same way as pressing the record button on the VCR’s remote control or front panel. To record directly from antenna or cable: 1. Press DEVICE on the TV’s remote to display the Device Selection menu. Highlight the traditional VCR and press POWER to turn on the VCR. If necessary, press GUIDE to select the input the VCR is on, such as Antenna input (or line input). 2. Press ENTER to switch the TV to the VCR. 3. Select the correct channel for recording on the VCR and then press REC to start recording. You will need to manually stop the recording at the end of the program. OR... 4. Press the DEVICE MENU button to display the VCR’s menu to schedule a delayed recording directly from antenna or cable. To record from Ant-1, Ant-2 or other devices, see NetCommand Controlled Recordings. Copy-Protected Material When attempting to record copy-protected material, the Record functions of the NetCommand and IEEE 1394 systems may be prevented or stopped. If you have a recording that is tagged “Record Once”, NetCommand will change the tag to “Record No More”. Restrictions for Traditional VCRs If turned On, the TV must be tuned to the source device. • Your VCR should be connected directly to Audio Video 1. • The VCR must be set manually to “Line Input”. Display the Device Selection menu, highlight the VCR and press GUIDE to change VCR...
Questo manuale è adatto anche per i modelli :TV - WD-52825 (5.33 mb)
TV - WD-52825 (5.33 mb)
TV - WD-62825 (5.33 mb)
TV - WD-62825 (5.33 mb)