valutazioni - 5, GPA: 3.6
(
)
)
|
Facilità d'uso
Your audio position must be programmed to either 010 or 011. Plug the CD player power cord into a switched outlet on the back of your A/V receiver. Pressing the POWER button turns On the A/V receiver, along with the CD player. In the audio position, for some CD players, the transport controls (FF, Play, Rew, etc.) operate the CD player. Figure 5. Programming the remote to control your A/V receiver. If the slide switch is set to TV when you enter an A/V receiver code, VOLUME and MUTE will control the A/V receiver rather than the TV. To return volume and mute control to the TV, set the slide switch to TV, press and hold POWER and enter 000. Some manufacturers may change their products, or they may use more than one remote control system. If this is the case, your remote control may not be able to operate your VCR, DVD, cable box, satellite receiver, or A/V receiver. Remote Control Functions: Special Functions When your remote control has been programmed to operate another manufacturer’s product, the function performed on each layer may vary. The most common functions are: VCR • POWER • CHANNEL up/down • PLAY • REC • PAUSE • STOP • FF/FWD • REW/REV Mitsubishi VCRs will be compatible with some additional buttons Cable Boxes and Satellite Receivers • POWER • CHANNEL up/down • 0-9 number buttons (on some models) • ENTER (on some models) • CANCEL (on some models) • ADJUST up/down/ left/right (on some models) • GUIDE (on some models) A/V Receivers • POWER • VOLUME • MUTE Mitsubishi A/V Receivers • Direct Input Selection buttons: numbers, SQV and QV (on some models) Mitsubishi CD Players (not all functions for all models) • PLAY • FF/FWD • REW/REV • PAUSE • STOP DVD and Laser Disc Players (not all functions for all models) • POWER • MENU • 0-9 number buttons (on some models) • PLAY • STOP • ARROW up/down/left/right (on some models) • FF/FWD • REW/REV • PAUSE • CANCEL (on some models) • ENTER • CHANNEL (on some models) Remote Control Operation of PIP and POP Picture-In-Picture (PIP) and Picture-Outside- Picture (POP) features allow you to view programming in different ways. While watching the main screen, you can display programs from other channels and other inputs. To see which inputs can and cannot be used together, see How Connections Affect the PIP and POP, page 20. You can display large and small PIPs, side-by-side pictures, three POPs, or nine POPs. Activating the PIP and POP Press PIP/POP to choose a display format. Each time the PIP/POP button is pressed on the TV remote control (within 3 seconds of each other), the PIP/POP cycles through the following display options. 1. POP: side-by-side pictures 2. POP: three POPs 3. POP: nine POPs 4. PIP: large PIP 5. PIP: small PIP To turn PIP/POP Off, wait at least 10 seconds, and press PIP/POP. The next time you activate PIP/POP, the last used PIP/POP format will be displayed first. See page 56 for more PIP and POP information. 4 Menu Screen Operations The ViewPoint® Menu System30 MAIN Menu 31 SETUP Menu33 CAPTIONS Menu37 CHANNEL EDIT Menu39 V-CHIP LOCK Menu42 ADVANCED FEATURES Menu46 AUDIO/VIDEO SETTINGS Menu50 The Menu System Mitsubishi’s exclusive on-screen operating system provides on-screen information for menu choices and changes. The following remote control buttons allow you to move quickly through the system (Figure 2): ADJUST or to select the menu item you want to change. ADJUST to move to the setting field. ADJUST or to change the settings. ADJUST to move back to the menu item. ENTER to enter into a menu, start an automatic function, or select a checkbox. CANCEL to clear a setting, or stop an automatic function. MENU to move back one menu screen at a time. HOME to exit all menus at once and return to TV viewing. A picture (icon) will be highlighted and can be selected using the remote control’s ADJUST arrows. When selected, the appropiate menu will appear or start an automatic function. You may then make changes within the menu or access available sub- menus. A highlighted square button indicates that you may make changes to the menu screen. The system includes the following special features: • The currently selected icon or button is highlighted with a rectangular yellow outline and the text color will be yellow. • On-screen instructions provide complete menu choice information. • Some on-screen menu options must be set before other options are available. For example, “Timer Menu” will only be possible if “Clock Time” and “Set Day” have been set. CANCELMENUEXCHENTERADJUST INFOGUIDEV-CHIPFORMATPIPCHPIPINPUTPIP/POPHOME SETUPCAPTIONSCHANNELEDITV-CHIPLOCKADVANCEDFEATURESAUDIO/VIDEOSETTINGSorchangeoptionENTERformenuMENUtoreturnADJUSTtoselect Figure 2. Remote control buttons used for navigation within the on-screen operating system. Figure 1. MAIN menu: The first screen to appear when you press MENU button on the remote. Main Menu Screens: Overview SETUP Menu (Figure 3) Basic (initial) setup instructions and functions are available through the SETUP submenu scre...
Questo manuale è adatto anche per i modelli :TV - WD-52327 (2.96 mb)
TV - WD-52327 (2.96 mb)
TV - WD-62327 (2.96 mb)
TV - WD-62327 (2.96 mb)