Log:
valutazioni - 1, GPA: 5 ( )

Istruzioni per l'uso Memorex, Modello HD-61Z585

Produttore : Memorex
File Size : 1.68 mb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


by itself • Perhaps the On/Off Timer is set. See page 53. • Check to see if the Sleep Timer was set. See page 59. It does not operate • This television is operated by a microprocessor. It is possible that external noise orcorrectly interference is causing the problem. If the television does not function correctly, remove the electrical plug from the wall outlet and wait a while before inserting it into the wall outlet again and operating the television. The clock is wrong • The power was interrupted and the clock was not reset. See page 52. The color quality • Tint and Color may be improperly adjusted. See page 48. is poor • The Video Status mode may be turned to the wrong setting. See page 59. There are lines • There could be interference from another electrical appliance, such as a computer, across the picture another TV or VCR. Move any such appliances further away from the TV. • There could be interference from a high-wattage appliance, like a hairdryer or vacuum, operating nearby. Move the antenna away from the appliance or change to a coaxial cable connection which is less prone to interference. The picture is spotted There are double • A building or passing airplane can reflect the original signal and produce a second, pictures (ghosts) slightly delayed one. Adjust your antenna position. Picture is snowy • Your antenna may be damaged, disconnected or turned. Check the antenna (image noise) connection. If the antenna is damaged, replace it. Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 42. Stereo or bilingual • Make sure the MTS settings are correct. See page 51. programs can't be heard The LAMP LED • It may be a malfunction of the internal electrical circuits. continues blinking 65 Troubleshooting Troubleshooting PROBLEMS CHECK There is no sound from the TV's speaker • The Center CH Input may be turned on. See page 47. • The TV Speaker option may be turned off. See page 46. Static electricity • It is normal to feel static electricity if you brush or touch the screen. You hear occasional crackling sounds • It is normal for the TV to make crackling sounds when first turned on or off. Unless the sound or picture become abnormal, this is fine. The AUTO DEMO finished automatically • The TV recieved a signal from the AV CompuLink • The On Timer that you programmed has started. • The channel that the AUTO DEMO is using is a channel that is blocked by V-Chip. • The Auto Shut Off that you programed has occured. The following are not malfunctions. • The television may make a creaking sound if the temperature of the room or the temperature inside the television changes. If there is no problem with the screen or sound, then there is no need to worry. • The lamp may make a noise when it blows, but this is not dangerous. • The lamp may make a noise when the power is turned on and a picture is displayed on the screen. This noise is caused when the mercury inside the lamp is heated, and is not a malfunction. • The still parts of a picture may remain on the screen. This is a characteristic of HD-ILA elements and not a malfunction. The picture will disappear over time. • The operation of this television is not guaranteed below 0.C. If the power is turned on while the temperature is below 0.C, the picture may be disturbed. Use the television when the temperature is 0.C or higher. • Although the HD-ILA element is manufactured with high-precision technology, please understand that some pixels may be lost or permanently displayed. • There is a cooling fan built-in to the television. Please understand that this fan will make some noise when the television is on and while cooling. • Although the picture may be temporarily disturbed and noise may be seen on the screen if the power is turned on immediately after it has been turned off. This is not a malfunction. 66 Appendix Changing the Lamp Appendix Changing the Lamp WARNING! It is very important that you NEVER TOUCH THE GLASS SURFACE OF THE NEW LAMP. Touching the glass surface will deposit oils from your hand onto the lamp surface. When the lamp heats up to its operating temperature, the oil will cause a difference in temperature on the lamp surface that will likely cause the lamp to break. Replace the lamp with part number TS-CL110U only! The television is designed to work specifically with this lamp. Using a different lamp, or a third-party manufacturer’s lamp could cause a malfunction and or damage to the television. This television uses a 110-Watt high-pressure mercury lamp to project images onto the television screen. When the lamp nears the end of its operating life, you may notice the picture becoming dark. When the picture begins to darken, or the lamp burns out, it is time to replace the lamp. The following instructions will tell you how to safely replace the lamp. WARNING! Under operating conditions, THE LAMP WILL GET EXTREMELY HOT AND WILL CAUSE SEVERE BURNS IF TOUCHED. Before attempting to replace the lamp...

Questo manuale è adatto anche per i modelli :
TV - HD-52Z575 (1.68 mb)
TV - HD-52Z575 (1.68 mb)
TV - HD-52Z585 (1.68 mb)
TV - HD-61Z575 (1.68 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie