valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
correct time and day are displayed (Refer to your local TV guide for PBS channel number). NOTE: A plus or minus one-hour offset can be programmed to adjust the clock when there is a time zone difference between the PBS TV station and the viewer. 1. Press GP to display the Main Menu. 2. Press A or ^ and or ^ to highlight the Set Up Icon. 3. Press (Lggj) to display the Set Up Menu. 26 Set Up Features Clock (Auto) (cont.) 4. Press ^ and or B^ to highlight CLOCK. 5. Press ^ or ^ to select AUTO (if necessary). 6. Press ^7 to highlight AUTO TIME SET 7. Press ^3 or B^ to display the AUTO TIME SET Menu. 8. Press A to highlight PBS CHANNEL. ACTIVATE 9. Tune TV or Cable Box to PBS channel, using the Remote Control Keyboard to enter PBS channel number. 10. Press ^ to highlight TIME ZONE ADJUST. f4ÜTOiT№&{5ETj TIME ZONE ADJUST ACTIVATE 11. Press ^ for minus one-hour offset or B^ for plus one-hour offset (if necessary). 12. Press ^ to highlight ACTIVATE. 13. Press ^ or ^ to display the AUTO TIME SET ACTIVATE Menu. WAITING FOR CORRECT TIME AND DAY S3 COMPLETED READ MENU INCOMPLETE READ MENU 14. Press (§3) four times to exit menus. -27- Set Up Features Clock (Manual) — Clock (when set) will display On Screen at initial turn on, after a channel change and when pressing it must be set in order to operate the dual Timer feature. 1. Press @3) to display the Main Menu. 2. Press A or ^and«3 or B^ to highlight the Set Up to display the Set Up Menu. 4. Press A or to highlight CLOCK. 5. Press ^ or B^ to select MANUAL. 6. Press Aor^ to highlight SET TIME. 7. Press ^ or ^ to Set Hours (set AM/PM accordingly). 8. Press W to highlight minutes position. 9. Press or B^ to set minutes. 10. Press I twice to exit Menus. NOTE: Pressing (Öä Up Icon. I again will return you back to the Set Set Day — The day of the week must be set in order to operate the Dual Timer feature. 1. Press to display the Main Menu. 2. Press A or Vand^ orB^ to highlight the Set Up Icon. 3. Press ItesJJ to display the Set Up Menu. cmm 4. Press A or W to highlight SET DAY. 5. Press ^ or B^ to select proper day of the week. 6. Press (¡tel) twice to exit Menus. Mode (TV or Cable) IMPORTANT NOTE: The proper input mode must be selected for the type of signal at the antenna input. • TV is used when the television is not connected to a Cabl e TV Syste m, f o r exa m p!e, when u si ng a VH F/U H F antenna (Channels 02-69). • CABLE is used when the television is connected to a Cable TV System and when not using a Cable Box (Channels 01-125). NOTE: Some Cable TV Systems encode (scramble) program material on specific channels. A cable company supplied decoder is required to reproduce an acceptable picture. Certain Cable TV Systems offset some channels to reduce interference. It will be necessary to use the cable company supplied converter to receive these specific channels. 1. Press to) to display the Main Menu. 2. Press A or ^ and/or ^ to Icon. highlight the Setup 3. Press (GUD to display the Set Up Menu. 4. Press A or W to highlight Mode. 5. Press ^ or ^ to select TV or CABLE. 6. Press (EES) twice to exit menus. -28- Set Up Features AlltO Programming - The Auto Programming feature allows you to place all channels with a video signal into Channel Scan Memory. When you press A or only those channels with a video signal will be accessed. NOTE: TV or Cable Tuning mode must be set properly for your system. 1. Press fed) to display the Main Menu. Press A or orB> to highlight the Set Up Icon. 2. 3. Press [Lg™DJ to display the Set Up Menu. 4. Press A or ^ to highlight AUTO PROGRAM. 5. Press ^ or ^ to start Auto Programming Scan. Channels will automatically advance until all channels have been scanned. • Channel numbers with video signal present will turn blue which indicates stored in Channel Scan Memory. 6. Press yij) twice to exit menus. NOTE: Some channels with very weak signals may be locked into memory. These must be deleted manually using the Manual Program feature. Helpful Hints: After Auto Programming: Blue channel number indicates channel is in Channel Scan Memory. All channels are available by direct access using the Keyboard numbers “0 through 9”. After Auto Programming Scan has completed, up to 15 channels will be programmed into the FAVORITE Channel Scan if space is available. Any original channels that were programmed into FAV CHANNEL will remain. (Refer to Favorite Channel Scan for deleting unwanted channels.) Manual Programming - This feature allows you to select which channels are placed into Channel Scan Memory so when you press A or ^ only those channels you desire will be accessed. 1. Press the (§10) to display the Main Menu. 2. Press A or and ^ or ^ to highlight the Set Up Icon. 3. Press (jggj) to display the Set Up Menu. mm mmm ¡MANUAL PROGRAM mmm 4. Press A or W to highlight MANUAL PROGRAM. 5. Press ^ or ^ to display Manual Programming Menu. 6. Use the Remote Control...
Questo manuale è adatto anche per i modelli :TV - Color Television CT-36SF24 (1.69 mb)