valutazioni - 3, GPA: 4.3 ( )

Produttore : Panasonic File Size : 4.52 mb File Nome : Lingua di insegnamento:

CableCARDTM Installation (continued) How to connect the “1, 2, 3” Input Terminals Input 3 is located on the front of the unit. (P. 10) Connects VCRs and other peripheral equipment (S-VHS VCR) S-VIDEO AUDIO • Similar connections are available at the INPUT 1, 2, 3 input terminals. (PP. 10-11) (VHS VCR) VIDEO AUDIO • Similar connections are available at the INPUT 1, 2, 3 input terminals. (PP. 10-11) Notes: • Select the desired VIDEO input position by pressing the TV/VIDEO button. (P. 32) • When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video input terminal are connected at the same time. Getting ed Installation (continued) How to con nect the COMPONENT VIDEO Input Terminals Because each Y, PB, and PR signal is input independently, the Component signal allows for more accurate color reproduction. The Component signal output terminal indication will differ according to the output device (Y, PB, PR). Please read the operating instructions included with the output device. Connecting a DVD Player to COMPONENT VIDEO IN DVD Player COMPONENT VIDEO AUDIO • Similar connections are available at the COMPONENT VIDEO INPUT 1-3 Terminals. (PP. 10-11) Notes: • Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button. (P. 32) • Component video signals that can be input are 480i, 480p, 720p, and 1080i. Component Signals (Y, PB, PR) that can be Input Mode type Signal data Information menu displayNo. of dots (H . V) Vertical frequency (Hz) DTV FormatSignals 480i 720 . 480 59.94/60.00 480i 480p 720 . 480 59.94/60.00 480p 720p 1 280 . 720 59.94/60.00 720p *1080i 1 920 . 1 080 59.94/60.00 1080i Note: • Input signals, other than those listed with a * mark, will give you a beautiful, stable picture. For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: How to connect the AV OUT Terminals How to connect the AV OUT Terminals You can connect a VCR to the AV OUT terminal to record the program you are viewing on-screen. An external monitor can also be connected to the AV OUT terminals. Connect the VCR as shown below. Recording Equipment (S-VHS /VHS VCR) VIDEO AUDIO Notes: • This unit contains Video and Audio Outputs for the purpose of recording television programming to VCR. Due to license restrictions, if a device (STB, DVD, etc.) is connected to the HDMI input of the unit, no video or audio output is allowed. • AV Out signal is available when receiving digital channel. However, all formats will be down converted to NTSC. • Never connect the VIDEO IN and OUT terminals to the same video recorder, as this could cause incorrect operation. • Even if unit is in Split mode, OUT terminals only output the main picture and sound signals. A sub-picture, etc., will not be output. • AV terminals will not output Y, PB, PR, PC/HDMI IN or SD card signals. • Certain program content output from the AV Out connector may have the Macrovision signal modification applied to its signal, preventing VCRs from recording this video signal. Getting ed Installation (continued) How to connect the Amplifier Analog Audio Out To listen to the audio through a separate stereo system, connect an external audio amplifier to AUDIO OUT on back of unit. Stereo System (A Stereo Amplifier and Speakers) AUDIO Audio Adjustments • Select Speakers Off in Other Adjust menu under Audio menu. (See page 43.) • Set amplifier volume to the preferred level. Notes: • AUDIO OUT terminals cannot be connected directly to external speakers. • AV terminals will not output Component Video, PC/HDMI IN or SD card signals. For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: 19 Getting Start ed .............. Firmly connect the cable to the connector. Connect three or more speakers for surround sound. Speakers (example) Use the diagram below to connect the Digital Audio Output of your Projection Display to a Dolby Digital decoder. Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer channel, For a full Home Theater sound experience, an external Dolby Digital decoder and a multichannel amplifier must be connected to the Digital Audio Out jack on the unit. Procedure Connect the Digital Audio cable from the Digital Audio Out jack on the unit to the Digital Audio In connection on the Dolby Digital decoder. Notes: • When ATSC channel is selected, the output from the Digital Audio Out jack will be Dolby Digital. But, if NTSC channel is selected, the output will be PCM. • Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. Digital Audio Out Amplifier with built in Dolby Digital decoders. Installation (continued) How to ...

Scarica la tua

Per scaricare, digitare 2 cifre :