valutazioni - 4, GPA: 4.3
(
)
)
|
Facilità d'uso
37 select and follow the directions on screen to complete the setting. OK You need to be “Connected” to use network devices. Please set Access point settings to “Connected”. (example) Wireless network (Wireless network s ¦Sets / Changes wireless network setting Press “Wireless network” and display setetting) ting screen Follow the directions on screen to complWireless network WPS (Wi-Fi Protected Setup using push button) Please choose connection method: WPS (Wi-Fi Protected Setup using PIN number) Search for wireless networks Manual settings select OK * Wi-Fi Protected Setup is an easy setting of the Wi-FiAlliance’s certification .For more details on setting of an Access point, plerefer to operating manual for the Access point. ete the setting ase IP address/DNS settings Select “IP/DNS setting mode” and set to “Automatic” (When IP/DNS automatic acquisition in DHCP can be used) Menu IP address/DNS settings IP setting mode IP address 192.168.0.5 Subnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Automatic The acquired address is displayed. select OK Each IP address is acquired automaticallyIf you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances. If you are not sure, check with the pewho installed the equipment, or check the instructioneach device. rson s for Proxy setting Search for Wireless networks: Select an access point from the ones searched for automatically, and configure the settings as instructed on the screen. WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons. WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point. Manual settings: Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect. .When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN. ¦Manual setting Select “IP/DNS setting mode” and set to “Manual” Select the item and press OK Check the specifications of the broadband router and enter each IP address. Or Enter each IP address as was specified by the provider Using IP address 0 . 0 . 0 . 0 Set only if specified by the provider. It is not required for normal household use. Select “Proxy setting” ¦Proxy address Menu IP address/DNS settings IP setting mode IP address 192.168.0.5 AutomaticSubnet mask 255.255.255.0 Default gateway 192.168.0.254 DNS setting mode Automatic DNS 192.168.0.20 Proxy setting This is the address of the relay server that is connected select to the target server instead of the browser and sends data to the browser. Setting is only required if specified OK by the provider. ¦Proxy port This number is specified by the provider together with the Proxy address. Select item and press OK select OK Menu Proxy setting Proxy address 0Proxy port Advanced Enter address or port number and press OK .Entering characters (p. 19) Network cameras list Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras. Press “Network cameras list” and display screen Set Network camera setting Select RETURN OK Network cameras list Model Status Default ...... ...... ...... ...... ...... ...... ...... ... ... ... ... ... ... ... Camera name BL-C210A ConnectedCamera 1 Find cameras Delete Disconnect Default camera select .For this operation, please refer to the operating manual for the Network camera. Start camera search. .Before you start to search for a camera, switch the camera to registration mode. .Search condition also depends on “Network settings” Delete camera information. Disconnect to camera. “Disconnected” will be displayed in “Status”. Set to default use. Displayed “(Default)” next to camera name. (Available only when reconnecting) Connect to Camera. “Connect” will be displayed in “Status”. Software update Select “Software update” select OK Menu Network settings Network cameras list Software update Mac address Connection test Network connection Wireless network IP address/DNS settings Wireless (WiFi) 00-0b-97-7c-65-e9 Press OK to start the Software update screen Follow directions on the screen .Set “Clock” first. (p. 15) Using EASY IPTV Using EASY IPTV This function allows you to access Internet services, such as VOD (Video-on-demand), music distribution or social networking service etc, easily with selecting the VIERA TOOLS icon. .You need a broadband environment to use this service. ¦Press to exit from a menu screen ¦Press to go back to the previous Preparations .Network connections (p. 35) .Network settings (p. 36-38) Display VIERA TOOLS Select the item (example) select next Services contents VOD (Video-On-Demand) Music distribution/Radio service SNS (Social Network Service) Using .Not all EASY IPTV services are available depending on your country or area your select. (p. 13) .Available EASY IPTV ...