|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
To show joints between TVs. Suitable for still image display. TH-42PS9UK Step 4, Page 34 (2 . 2, 3 . 3, 4 . 4) (2 . 2F, 3 . 3F, 4 . 4F) TH-37/42/50PH9UK Step 6, Page 36 ON OFF ID Remote Control Function You can set the remote control ID when you want to use this remote control on one of several different TVs. 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of -, for the tens digit setting. Press one of -, for the units digit setting.4 Notes: • The numbers in 2, 3 and 4 should be set up quickly. • Adjustable ID number range is 0 - 99. • If a number button is pressed more than two times, the first two numbers become the ID number for the remote control. ID remote control button operation The operation is the same as normal remote control except for the button. ID Cancellation Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.) Notes: • Set the Remote ID “On” to operate the ID remote control. If remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. (see page 43) • The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 43). SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals “COMPONENT” R, G, B, HD, VD signals “RGB” 1/2PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. Press to select the desired mode. COMPONENT RGB Press to exit from adjust mode. Note: Selection may not be possible, depending on which optional board is installed. 3D Y/C FILTER – For NTSC AV images Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) Press to select the “3D Y/C FILTER (NTSC)”. Press to set ON / OFF. 1/2PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP Press ACTION ( ) button Press to exit from adjust mode. Note: When ON, this setting only affects NTSC input signals. 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF SET UP for Input Signals COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) Press to select the “COLOR SYSTEM” or “Panasonic AUTO”. Press to select each function. If the image becomes unstable: With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal. Press ACTION ( ) button 1/2PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF Mode Function COLOR SYSTEM Set the color system to match the input signal. If set to “AUTO”, the color system is determined automatically. AUTO SECAM M.NTSC NTSCPAL Panasonic AUTO (4 : 3 ) Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is selected. If you would like to view 4:3 images in Just format, set to “JUST”. Note: Panasonic AUTO does not function when TY-FB9BD (BNC Dual Video Terminal Board (option)) is used. 3:2 PULLDOWN / VIDEO NR 3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to OFF. Notes: When ON, this setting only affects the following signal input: • NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal. • 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal. VIDEO NR: Automatically reduces unwanted picture noise. Note: VIDEO NR cannot be adjusted while a PC signal is being applied. Press to select 3:2 PULLDOWN or VIDEO NR. Press to set ON/OFF. 3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF NORMAL [ VIDEO ] VIDEO NR OFF SYNC VIDEO NR SIGNAL AUTO H-FREQ. V-FREQ. kHz33.8 Hz60.0 [ RGB ] 3 : 2 PULLDOWN OFF OFF 1/2PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL POWER SAVE SET UP Press ACTION ( ) button Press to exit from adjust mode. 3 : 2 PULLDOWN VIDEO NR SIGNAL OFF OFF [ COMPONENT ] 3 : 2 PULLDOWN VIDEO NR SIGNAL OFF OFF H-FREQ. V-FREQ. kHzHz33.8 60.0 [ Digital ] SET UP for Input Signal...
Questo manuale è adatto anche per i modelli :TV - TH-42PH9UK (2.76 mb)
TV - TH-50PH9UK (2.76 mb)
TV - TH-42PS9UK (2.76 mb)