Then press V/ to move cursor to the second position and repeat until the complete Station Identifier is entered (up to 4 characters). Press to highlight ENTER CHANNEL NUMBER. Then repeat steps 4 through 6 to continue adding Channel Station Identifier(s). 8. Press ACTION O twice to exit menus. NOTE: To delete a Channel Caption (Station Identifier) from memory all four character positions in the “ENTER CAPTION” area must display a dash mark (-). Timer Features Sleep Timer This feature is used for automatic turn off in 30, 60 or 90 minutes. Display will flash 3,2 and 1 to indicate the last three remaining minutes prior to turn off. The Recall display will also appear. NOTE: This feature will be disabled when Auto Power On is activated. ACTION 1. Press O . 2. Press ^ or^? and ^9 or ^ to highlight the Timer Icon. ACTION 3. Press o to display the Timer Control Menu. ÎTJMERÎC0NTR013 SLEEP TIMER NO p— - OFF — : & ; CHANNEL 3 ~ set : • NO 4. Press ^ to select NO, 30, 60 or 90 minutes (Sleep Timer will be activated). ACTION 5. Press o twice to exit menus. NOTE: To deactivate Sleep Timer repeat steps 1 through 4. In step 4 select “NO" instead of minutes. Helpful Hints: Press the RECALL button to display the remaining minutes for Sleep Timer, the status will display in the bottom left corner (red). 12 Timer Features (cont.) Special Feature: Automatic turn “OFF” after 90 minutes. The TV has a special feature that will shut itself OFF after 90 minutes when turned ON by the program timer unless a function key is pressed during the 90 minutes. This feature is useful so that the TV will not remain ON unattended for an extended period of time. Programming the OFF timer will cancel the automatic OFF Special Feature. Program Timer This feature is capable of turning the TV on, tuned to a desired channel and off at a predetermined time (one day or daily). The clock must be set for this feature to operate. (Refer to the Set-Up Menu to set time.) NOTE: This feature will be disabled when Auto Power On is activated. ACTION 1. Press O . 2. Press ^ or^ and ^3 or ^ to highlight the Timer Icon. 3. Press ACTION o to display the Timer Control Menu. TIMER CONTROL SLEEP TIMER N PROGRAM TIMER ON OFF CHANNEL ■.■---..'.'■■SET- ■ 4. Press ^ to highlight ON (time). 5. Press or ^ repeatedly to set hours (set AM/PM accordingly). 6. Press ^ to highlight the minutes position. 7. Press ^9 or repeatedly to set minutes. 8. Press ^ to highlight OFF (time). WIM ER CONTROL^ »iSLEER, TIMER ■>’ N0' ; PROGRAM TIMER :-s, \-:ON:t^;:3l2;!-::-- 30 - AM : ■ OFF ----- \ CHANNEL 3 i\ : SET NO r - ■■■■ 9. Repeat steps 5 through 7 for setting OFF (time). 10. Press ^ to highlight CHANNEL. PÎ^BEIMERICÜNTROIS <3 orB> the chc 12. Press ^ to highlight SET. 11. Press ^ or or use the Remote Control Keypad to enter the channel number desired when the set turns “ON”. TIMER CONTROLS, 13. Press to select: • NO - not activated • ONE DAY - activated • DAILY - activated ACTION 14. Press o twice to exit menus. NOTE: To deactivate Program Timer select NO in step 13. Helpful Hints: • If the Program Timer “ON” functions while the set is operating, the set will automatically tune to the channel designated in the Timer Program. -13- Set-Up Features Set Time Clock (when set) will display on screen at initial “Turn On”, after a channel change and when pressing the RECALL button. The time must be set first in order to operate the Program ON/OFF Timer. NOTE: This feature will be disabled when Auto Power On is activated. ACTION 1. Press O . 2. Press ^ or^ and ^3 or to highlight the Set-Up Icon. ACTION 3. Press o to display the Set-Up Menu. ÎS’ETt'URÎ SET TIME -- : vANT : - TV > AUTO PROG NO (MANUAL PROG NO V AUTO POWER ON OFF ?E9 MODE OFF ESPAÑOL FRANÇAIS 4. Press ^3 or ^ to set hours (set AM/PM accordingly). 5. Press to select minutes position. 6. Press ^3 or ^ repeatedly to set minutes. ACTION 7. Press O twice to exit menus. Antenna (Ant) The proper Input mode must be selected for the type of signal at the antenna input. o TV mode is used when the Receiver is not connected to a cable TV system, for example when using a VHF/UHF antenna (channels 02 - 69). o Cable mode is used when the Receiver is connected to a Cable TV system and you are not using a cable company converter box (channels 01 - 125). NOTE: This feature is disabled when Game Guard Lock is activated. ACTION 1. Press O • 2. Press ^ or^ and or to highlight the Set-Up Icon. ACTION 3. Press O to display the Set-Up Menu. .SETtIIP, SET TIME- ■ :: ANT TV AUTO PROG NO MANUAL PROG NO AUTO POWER ON OFF 23 MODE OFF ESPAÑOL FRANÇAIS 4. Press & to highlight ANT. 5. Press ^3 or E^ to select TV or CABLE. ACTION 6. Press O twice to exit menus. Auto Prog This feature allows you to place all channels with a video signal into Channel Scan Memory. NOTE: This feature Is disabled when Game Guard Lock is activated. ACTION 1. ...

Questo manuale è adatto anche per i modelli :
TV - TP2009D (2.99 mb)
TV - SP2019D (2.99 mb)