valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
28 Adjusting the picture geometry for an RGB source ........................................................................ 29 Presetting and naming inputs from external equipment ................................................................. 29 Manually tuning analogue signals................................................................................................... 30 Additional information Connecting additional equipment ...................................................................................................31 Remote control configuration for VCR/DVD....................................................................................33 Specifications..................................................................................................................................34 Troubleshooting...............................................................................................................................35 Removing and cleaning the glass panel .........................................................................................36 MODE REC 1 0 OK Using the menu system of this TV All the menus of this TV are activated by the remote control handset. The V, v, B, b and OK buttons of the remote control are used to navigate around the menus and to store any settings you make or change. Throughout the pages of this manual you will notice drawings of V button the remote control handset with certain buttons highlighted white. This indicates the buttons you will need to press when following the instructions. In the example shown the V, v and OK buttons are the buttons to be pressed. OK button v button Getting started Follow steps 1 - 6 to install your TV and view the TV programmes 1. Checking the accessories supplied DIGITAL MODE REC -/-Batteries Modem Remote control Note: Please contact your local approved satellite installer for information regarding satellite and telephone connection. 2. Inserting batteries into the remote control handset 1 Place a coin in the slot provided at the bottom of the remote control and turn anti clockwise to release battery compartment. 2 Insert batteries as indicated in battery compartment. 3 Replace battery compartment and lock in place by twisting coin clockwise in slot. Always remember to dispose of batteries in an environmentally friendly way 3. Connecting your aerial and satellite Getting started 1. Connect your existing aerial to the socket marked on the rear of the TV as shown. 2. Connect your satellite dish to the F-type socket marked . Connecting a VCR to the TV 1. Connect your satellite dish to the F-type socket marked on the rear of the TV as shown. 2. Connect your existing aerial to the RF IN socket on your VCR. 3. Connect a lead from the RF output of your VCR to the analogue socket marked then connect a scart lead as shown. 4. Connect the VCR to the mains socket and switch on. 5. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables the TV to locate and store the video channel during the ‘Automatically tuning the TV’ procedure. Scart lead (not supplied) 4. Switching on the TV 1. Connect the TV plug to your mains socket (220 - 240 V AC, 50 Hz). 2. Press the on/off switch in a forward direction to switch on the TV. Note: If the red indicator on the front of the TV is lit the TV is in standby mode. Press the TV button / on the remote control to switch on the TV. Please be patient as the picture may take a few moments to appear on screen. Getting started 5. Automatically tuning the TV 1. When you switch on this TV for the first time, the Language/Country menu appears on screen with the word ‘English’ highlighted. Press the V or v buttons on the remote control to choose the language you require then press the OK button to confirm. DIGITAL MODE REC OK 2. The word Country is now highlighted. Press the V or v buttons to choose the country in which you wish to operate the TV, then press the OK button to confirm. Note: The digital features of this set are designed for use in Germany only. 3. The autotune prompt screen appears. Press the OK button to select Yes. 4. The Main Menu is now displayed. Press the v button to highlight ‘Quick tuning’ or ‘Full tuning’, then press the OK button twice. 5. A display appears asking you to press OK to begin scanning. Whilst scanning is taking place a progress menu is displayed showing the number of services stored and the percentage of scanning completed. The full scan will take some time so please be patient. When the scanning percentage reaches 100%, the on- screen message ‘Auto tuning successfully completed’ is displayed. Note: During all subsequent scans, only new channels will be added to the original scan. Getting started 6. Press the BLUE button repeatedly to remove all digital menus from the TV screen. The analogue tuning display appears automatically and the TV begins to search for analogue signals. Once all signals have been captured and stored, the TV returns to no...