valutazioni - 3, GPA: 4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
You can switch to the selected device. N Only when you set Anynet+ (HDMI-CEC) to On in the System menu, the Device List menu appears. • Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. • If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. ► English A □ Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. N When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. ► English A N NOTE • You can only control Anynet+ devices using the TV remote control, not the buttons on the TV. • The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. ► English □ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable ► connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. English Problem Possible Solution Anynet+ does not work. < • Check whether the TV remote control is in TV mode. • Check whether the remote control is Anynet+ compatible. • Anynet+ does not work in certain situations. (Searching channels, operating My Downloads or Plug & Play (initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. English A Problem Possible Solution I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the System menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the Anynet+ menu. • Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. • Press > CH <, CH LIST and PRE-CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) ► English Problem Possible Solution The message “Connecting to Anynet+ device...” appears on the screen. • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. • Use the remote control when the Anynet+ setting or switching to view mode is complete. The Anynet+ device does not play. • You cannot use the play function when Plug & Play (initial setup) is in progress. A ► English Problem Possible Solution The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the System menu. • Search Anynet+ devices again. • You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+ functions. • If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. ► English Problem Possible Solution The TV sound is not output through the receiver. • Connect the optical cable between TV and the receiver. A ► English for LCD 550 series and above □ About AllShare™ AllShare™ connects your TV and compatible Samsung mobile phones / devices through a network. In addition, you can play media contents including videos, photos and music saved on your mobile phones or the other devices (such as your PC) by controlling them on the TV via the network. N For more information, visit “or contact the Samsung call centre. Mobile devices may need additional software installation. For details, refer to each device’s user’s guide. a ► English □ Setting Up AllShare™ O MENum —— —— — ENTERE ■ AllShare Settings • Media (On / Off): Enables or disables the media function. When the media function is on, Media contents play can be controlled by mobile phones or other devices that support DLNA A DMC. AllShare Settings - On Media . on ► English ■ Medi...
Questo manuale è adatto anche per i modelli :TV - LA32D450G1W (6.3 mb)
TV - LA32D550K7W (6.3 mb)
TV - LA46D550K7W (6.3 mb)
TV - LE19D450G1W (6.3 mb)