valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
N The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. N The Anynet+ functions do not operate with other manufacturers’ products. N The ., . operations may differ depending on the device. ¦ Recording You can make a recording of a TV Programme using a Samsung recorder. . Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). . Press the ^ or Ў button to select Recording Immediately and press the ENTERE button. Recording begins. N When there is more than one recording device When multiple recording devices are connected, the recording devices are listed. Press the ^ or Ў button to select a recording device and press the ENTERE button. Recording begins. N When the recording device is not displayed select Device List and press the Red button to search devices. . Press the EXIT button to exit. N You can record the source streams by selecting Recording: (device_name). N Pressing the . button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. N Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device, refer to the recording device’s users manual. ¦ Listening through a Receiver (Home theatre) You can listen to sound through a receiver instead of the TV speaker. . Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). . Press the ^ or Ў button to select Recording Immediately and press the ENTERE button. Recording begins. Press the ^ or Ў button to select Receiver. Press the < or > button to select On or Off. . Press the EXIT button to exit. N If your receiver supports audio only, it may not appear in the device list. N If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. U MoveE EnterR ReturnViewTVDeviceListRecording:DVDRDVDRMENUDVDRINFOSetup U MoveE EnterR ReturnViewTVDeviceListRecording:DVDRDVDRMENUDVDRINFOReceiver:OffSetup English - ¦ Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. I want to start Anynet+. I want to exit Anynet+. The message ‘Connecting to Anynet+ device...’ appears on the screen. The Anynet+ device does not play. The connected device is not displayed. The TV programme cannot be recorded. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theatre). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesn’t work in certain situations. (Searching channels, Operating Media Play, Plug & Play, etc.) When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. Press P >/<, PRE-CH, and FAV.CH to change the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play is in progress. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI 1.3 cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. Check whether the antenna jack on the recording device is properly connected. English - CONTENT LIBRARY ¦ Using the Content Library The Content Library allows you to enjoy various content on your TV. You can use the default content stored in the TV memory or you can enjoy new content using a USB device or via the Internet. Using the Content Library Menu . Press the MENU button. Press the ^ or Ў button to select Application, then press the ENTERE button. . Press the ...
Questo manuale è adatto anche per i modelli :TV - UA40B7000WR (17.92 mb)
TV - UA46B7000WR (17.92 mb)