valutazioni - 4, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
When Antenna Source is set to Satellite: ¦ Satellite: Selects the satellite using the up/down buttons. ¦ Transponder: Selects the transponder using the up/ down buttons. ¦ Scan Mode (All Channels / Free Channels Only): Selects either free or all channels to store. ¦ Network Search (Disable / Enable): Enable / Disable network search using the up/down buttons. ¦ Signal Quality: Display the current status of broadcasting signal. . Information on a satellite and its transponder is subject to change depending on the broadcasting conditions. . When setting is completed, move to Search and press the ENTERE button. Channel scan is started. Satellite System Setup The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite or Canal Digital Sat. Before running Auto Store, Set Satellite System Setup. Then channel scan is run normally. ¦ Satellite Selection: You can choose the satellites for this TV. . This function is available when Antenna is set to Satellite. ¦ LNB Power (Off / On): Enables or disables the power supply for the LNB. ¦ LNB Settings: Configures the outdoor equipment. ¦ Satellite: Selects the satellite for receiving digital broadcasts. Transponder: Selects a transponder from the list or adds a new transponder. DiSEqC Mode: Selects DiSEqC mode for the selected LNB. Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. Signal Quality: Display the current status of broadcasting signal. ¦ Positioner Settings: Configures the antenna positioner. Positioner (On / Off): Enables or disables the positioned control. Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of satellite antenna according to a certain satellite, when the signal of that satellite is needed, the satellite antenna can be moved to pre-populated position. – Satellite: Selects the satellite to set the position for. – Transponder: Selects a transponder from the list for signal reception. – Moving Mode: Selects the movement mode between discrete and continuous movement. – Step Size: Adjusts the step size degrees for the antenna rotation. Step Size is available when Moving Mode is set to Step. 03 Basic Features English 15 Basic Features – Go to Stored Position: Rotates the antenna to the stored satellite position. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores current position as the selected positioner limit. – Signal Quality: Display the current status of broadcasting signal. Installer Mode: Sets limits to the scope of movement of satellite antenna or reset the position. Generally, installation guide uses this function. – Limit Position (East / West): Selects the direction of the positioner Limit. – Antenna Position: Adjusts and stores the antenna position for the selected satellite. – Store Current Position: Stores the current position as the selected positioner Limit. – Go to Zero: Moves the antenna to the reference position. – Reset Positioner Limit: Allows the antenna to rotate over the full arc. ¦ Reset All Setting (OK / Cancel): All satellite settings will be reset to the initial values. ¦ Editing Channels Channel Manager Option Menu (in Channel Manager) 1. Select a channel and press the TOOLS button. 2. Edit the channel name or number using the Edit Channel Name or Edit Channel Number menu. ¦ Edit Channel Name (analogue channels only): Assign your own channel name. ¦ Edit Channel Number (digital channels only): Edit the number by pressing the number buttons desired. ¦ Other Features Cable Search Option (depending on the country) Sets additional search options such as the frequency and symbol rate for a cable network search. ¦ Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each country) ¦ Symbol Rate: Displays available symbol rates. ¦ Modulation: Displays available modulation values. Channel Manager Channel Manager Option Menu Set each channel using the Channel Manager menu options (Lock / Unlock, Timer Recording, Timer Viewing, Sort, Reorder, Delete, Select All / Deselect All). Option menu items may differ depending on the channel status. 1. Select a channel and press the TOOLS button. 2. Select a function and change its settings. ¦ Lock / Unlock: Lock a channel so that the channel cannot be selected and viewed. . NOTE • This function is available only when the Child Lock is set to On. • The PIN in...
Questo manuale è adatto anche per i modelli :TV - UE32C6715US (26.55 mb)
TV - UE32C6735US (26.55 mb)
TV - UE32C6740SS (26.55 mb)
TV - UE37C6705US (26.55 mb)