valutazioni - 4, GPA: 4.5
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
You will only hear sound from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e. . Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV. . English . You can connect only one Home Theatre. . You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions. . Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. . Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. . . English Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Changes Anynet+ mode to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) Tools Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. NDepending on the device, this menu may not be available. . . English .. English Anynet+ Menu Description (device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title menu of the DVD recorder will appear. NDepending on the device, this menu may not be available. Receiver Sound is played through the receiver. .. English Anynet+ Menu Description (device_name) Title Menu Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title menu of the DVD recorder will appear. NDepending on the device, this menu may not be available. Receiver Sound is played through the receiver. . Switching between Anynet+ Devices 1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTERE button to select Device List. NIf you cannot find a device you want, press the a button to refresh the list. 2. Select a device and press the ENTERE button. You can switch to the selected device. NThe Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu. .. English . Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching operation. . If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. . . English . Listening through a Receiver You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker. 1. Select Receiver and set to On. 2. Press the EXIT button to exit. NIf your receiver supports audio only, it may not appear in the device list. NThe receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV. .. English NWhen the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the receiver. .. English . Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. . • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Only one receiver (home theatre) can be connected. • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video / Audio / HDMI cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. . • Check whether the TV remote control is in TV mode. • Check whether the remote control is Anynet+ compatible. • Anynet+ doesn’t work in certain situations. (Searching channels, operating My Downloads or Plug & Play (initial setup), etc.) • When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off and on again. • Check if the Anynet+ Function of Anynet+ device is set on. English Problem Possible Solution I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View TV in the An...
Questo manuale è adatto anche per i modelli :TV - PS43D450A2W (3.3 mb)
TV - PS43D451A3W (3.3 mb)
TV - PS43D452A5W (3.3 mb)
TV - PS43D455A2W (3.3 mb)