valutazioni - 0, GPA: 5 ( )

Produttore : Toshiba File Size : 6.63 mb File Nome : Lingua di insegnamento:

For detailed signal specifications, see page 66. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz Note: To connect a PC to the HDMI input, see page 19. To connect an HDMI device, you will need: • one HDMI cable (type A connector) per HDMI device . . For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). . . To display an 1080i/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. . . HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). . . See “Setting the HDMI® audio mode” (. page 33). HDMI device TV back panel To view the HDMI device video: Select the HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source on the TV.* * * To select the video input source, press INPUT on the remote control (. page 22). To program the TV remote control to operate other devices, see Chapter 3. To connect a DVI device, you will need: • one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device . . For proper operation, the length of an HDMIto- DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • one pair of standard analog audio cables per DVI device . . An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). . . See “Setting the HDMI® audio mode” (. page 33). VIDEO AUDIO L R L R OUT IN DVI/HDCP OUT IN DVI device TV back panel Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • • When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. • • When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. Control panel REGZA-LINK® connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 56. TV back panel Audio receiver Playback device (REGZA-LINK DVD player,etc.) Playback device (REGZA-LINK DVD player,etc.) To connect an Audio Receiver and Playback Devices, you will need: • HDMI cables (. page 13) Note: • If several devices are connected, REGZA-LINK feature may not operate properly. • For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ). Before controlling the device(s): • After completing the above connections, set the REGZA-LINK Setup menu as you desire (. page 58). • T...

Scarica la tua

Per scaricare, digitare 2 cifre :