valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
With SETUP highlighted in the Service Bar, press INFO to display a help screen. Press INFO again to close the screen. Change system settings This option appears only after you have completed the initial TV Guide On Screen setup process (as described in Chapter 5). 1. From the SETUP screen, highlight CHANGE SYSTEM SETTINGS and press ENTER. 2. Press ENTER again to display the Confirming Your Settings screen. 3. Highlight one of the options, press ENTER, and follow the on-screen instructions. Change channel display This option allows you to edit channel information that appears in LISTINGS, including the following: •Reorder the position the channels appear in LISTINGS. • Change the “tune channel” number. Note: The “tune channel” is the channel on which you receive astation. For example, two viewers in the same zip code may receive the same station on different channel numbers, depending on whether they have Cable service or are using a cable box. •Switch a channel to one of the following settings: – On (channel is always displayed in LISTINGS) – Off (channel is never displayed in LISTINGS) – Auto-Hide (channel is displayed in LISTINGS only when program information is available) 1. From the SETUP screen, highlight CHANGE CHANNEL DISPLAY and press ENTER. 3. Highlight one of the options, press ENTER, and follow the on-screen instructions. 2. Press ENTER again to display the Grid Options panel menu. 64 64 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. HMX94(E)062-65(7c-TVG) 64 9/27/04, 10:48 AM Chapter 7: Using the TV Guide On Screen interactive program guide TV Guide On Screen Services (continued) SETUP screen (continued) Change default options This option allows you to change default settings in the following categories: •General Default Options •Record Defaults •Remind Defaults General default options 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. 2. Highlight GENERAL DEFAULT OPTIONS and press MENU to display the General Default Options panel menu. 3. Enter the following information in the panel menu fields: •BOX SIZE: The initial Info Box size when you open the TV Guide On Screen system. Choices are No, Small (default), Large, and Last Used. •BOX CYCLE: The Info Box size rotation when you press INFO on the remote control when the TV Guide On Screen system is open. Choices are No Only, Small Only, Large Only, No & Small, No & Large, Small & Large, and All (default). •AUTO GUIDE: Automatic entry into the TV Guide On Screen system when the TV is powered on. Choices are On (default) and Off. Note: Set the AUTO GUIDE to Off if you do not want the TV Guide On Screen system to open every time you turn on the TV. 4. When finished, press ENTER to highlight DONE, and press ENTER again to close the menu and accept the changes (or highlight CANCEL to close the menu with no changes). Record defaults 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. 2. Highlight RECORD DEFAULTS and press MENU to display the Record Defaults panel menu. 3. Enter the required information in the panel menu fields (start time, end time, recorder choice, how long to keep a Record event, the quality of the recording). See “Record features” on page 60 for details on entering values in these fields. 4. When finished, press ENTER to highlight DONE, and press ENTER again to close the menu and accept the changes (or highlight CANCEL to close the menu with no changes). Remind defaults 1. From the SETUP screen, highlight CHANGE DEFAULT OPTIONS and press ENTER. 2. Highlight REMIND DEFAULTS and press MENU to display the Remind Defaults panel menu. 3. Enter the required information in the panel menu fields (power On TV, auto-tune, when to display the Remind screen). See “Remind features” on page 63 for details on entering values in these fields. 4. When finished, press ENTER to highlight DONE, and press ENTER again to close the menu and accept the changes (or highlight CANCEL to close the menu with no changes). Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 65 HMX94(E)062-65(7c-TVG) 65 9/27/04, 10:48 AM 8 Using the TV’s features Selecting the video input source to view To select the video input source to view: 1. Press INPUT on the remote control or TV/VIDEO on the TV front panel. 2. Press 0–7 to select the input source you want to view, depending on which input jacks you used for connecting your devices (see Chapter 2). The current signal source displays in the top right corner of the INPUT SELECTION screen. Note: •While the Input Selection screen is open, you also can use the yz buttons on the remote control (or the Channel yz buttons on the front panel) to change the input. •While the Input Selection screen is not open, you can repeatedly press the INPUT button on the remote control or the TV/VIDEO button on the TV front panel to change the input. •To select an IEEE -1394 input source, press the TheaterNet DEVICE button on the remote control (see page 26 & 44). • If an IEE E-1...
Questo manuale è adatto anche per i modelli :TV - 62HMX94 (4.01 mb)
TV - 52HMX94 (4.01 mb)
TV - 62HMX94 (4.01 mb)