valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Press c or d to highlight the item you want to adjust. 3. Press a or b to adjust the level. AUDIO SETUP CH OPTION • a makes the sound quality weaker or decreases the balance in the right channel, depending on the item selected. • b makes the sound quality stronger or decreases the balance in the left channel, depending on the item selected. Using the surround sound feature The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. The feature uses stereo signals from a TV broadcast or video input. To turn on the surround sound feature: 1. Select the STEREO mode, if available (see “Selecting stereo/SAP broadcasts” on page 26.) 2. Press MENU, and then press a or b until the AUDIO menu appears. 3. Press c or d to highlight SURROUND. 4. Press a or b to highlight ON. AUDIO SETUP CH OPTION To turn off the surround sound feature: Highlight OFF in step 4 above. In general, you can leave your TV in surround mode because it will automatically output the type of sound being broadcast (surround stereo or monaural). Note: T reset the audio adjustments to the factory settings, press RESET. c d a b Menu Reset c d a b Menu 16:9 27 J3S00121A(E)_P26-BACK 27 13/01/2005, 5:42 PM PICTURE SELECT ADJUST TREBLE ON OFF OFF BASS BALANCE SURROUND STABLE SOUND 0 32 32 The StableSound feature limits the highest volume level to prevent extreme changes in volume when the signal source is changed. To turn on the StableSound® feature: 1. Press MENU, then press a or b until the AUDIO menu appears. 2. Press c or d to highlight STABLE SOUND. 3. Press a or b to highlight ON. Using the TV’s Features 28 J3S00121A(E)_P26-BACK 28 13/01/2005, 5:42 PM Appendix Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Problem Solution TV will not turn on • Make sure the power cord is plugged in, then press POWER. • The remote control batteries may be dead. Replace the batteries. No picture, no sound • Check the antenna/cable connections. • This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals through its ColorStream inputs. Switch the other device’s output to 480i interlaced mode first (see page 9). No sound, picture OK • The sound may be muted. Press VOLUME. • The station may have broadcast difficulties. Try another channel. • The MTS feature may be in SAP mode. Press the MTS button on the remote control until STEREO (or MONO) mode is active. Poor sound, picture OK • The station may have broadcast difficulties. Try another channel. • The MTS feature may be in SAP mode. Press the MTS button on the remote control until STEREO (or MONO) mode is active. Poor picture, sound OK • Check the antenna connections. • The station may have broadcast difficulties. Try another channel. • Adjust the PICTURE menu. • This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals through its ColorStream inputs. Switch the other device’s output to 480i interlaced mode first (see page 9). Poor reception of broadcast channels • The station may have broadcast difficulties. Try another channel. • Check the antenna connections. • If you are using a VCR, make sure the TV/VCR button is set correctly. Cannot receive above channel 13 • Make sure the TV/CABLE feature in the SETUP menu is set to “CABLE”. Unable to select a certain channel • The channel may be blocked by the V-Chip feature or CH LOCK feature, or erased with the add/erase feature. Cannot access signal input sources • Check the VIDEO LOCK feature. (Video1,Video2 and ColorStream) and/or Channels 3 and 4 Multiple images • The station may have broadcast difficulties. Try another channel. • Use a highly directional outdoor antenna. Poor color or no color • The station may have broadcast difficulties. Try another channel. • Adjust the TINT and/or COLOR in the PICTURE menu. • If you change the direction of the TV while it is turned on, the picture could suffer from color shading. If so, turn off the TV and allow it to cool for several hours before turning it on again. Black box on screen • Repeatedly press CAP/TEXT to turn off the Closed Caption Text mode. No stereo or SAP sound from a • Make sure the MTS feature is set properly. known MTS broadcast The V-Chip PIN code does not work • Change or reset your PIN code (pages 15 and 16). (U.S. V-Chip system only) The remote control does not operate • Remove all obstructions between the remote control and the TV. • The remote control batteries may be dead. Replace the batteries. 29 J3S00121A(E)_P26-BACK 29 13/01/2005, 5:42 PM Using the TV’s Features Setting upyour TV Using theRemote ControlConnectingyour TV Welcome to Toshiba ImportantSafeguards Appendix Specifications • This model complies with the specifications below. • Design and specifications are subject to change without notice. • This model may ...
Questo manuale è adatto anche per i modelli :TV - 20AF45 (1.68 mb)
TV - 14AF45 (1.68 mb)
TV - 20AF45 (1.68 mb)