valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
•Check the antenna/cable connection. •Keep the antenna cable away from other connecting cables. Picture or sound noise when viewing a TV channel•Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page26). Some tiny black points and/or bright points appear on the screen•The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. Picture contours are distorted•Change the current setting of “Cinema Drive” to other settings (page21). No colour on programmes•Select “Reset” (page21). No colour or irregular colour when viewing a signal from the Y, PB/CB, PR/CR jacks of / •Check the connection of the Y, PB/CB, PR/CR jacks of / and check if each jacks are firmly seated in their respective jacks. No picture from the connected equipment appears on the screen•Turn the connected equipment on. •Check the cable connection. •Press to display the connected equipment list, then select the desired input. •Correctly insert the memory card or other storage device in the digital still camera. •Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera. •Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played. Cannot select the connected equipment on the menu or cannot switch the input•Check the cable connection. No sound, but good picture•Press 2 +/– or % (Mute). •Check if the “Speakers” is set to “TV Speakers” (page23). No sound or noisy sound•Check if the TV system setting is appropriate (page26). The desired channel cannot be selected•Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank•The channel is for scrambled/subscription service only. Subscribe to a pay TV service. •Channel is used only for data (no picture or sound). •Contact the broadcaster for transmission details. Digital channels are not displayed•Contact a local installer to find out if digital transmissions are provided in your area. •Upgrade to a higher gain aerial. PictureSoundChannels 34 GBTroubleshootingCheck whether the 1 (standby) indicator is flashing in red. When it is flashingThe self-diagnosis function is activated. 1Count how many times the 1 (standby) indicator flashes between each three second break. For example, the indicator flashes three times, then there is a three second break, followed by another three flashes, etc. 2Press 1 on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing1Check the items listed below. 2If the problem still persists, have your TV serviced by qualified service personnel. No picture (screen is dark) and no sound•Check the antenna/cable connection. •Connect the TV to the AC power outlet, and press 1 on the TV. •If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the video input jack appears on the screen•Press to display the connected equipment list, then select the desired input. •Check the connection between the optional equipment and the TV. Double images or ghosting•Check the antenna/cable connection, location or direction. Only snow and noise appear on the screen•Check if the antenna is broken or bent. •Check if the antenna has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) •Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optional equipment. •When installing optional equipment, leave some space between the optional equipment and the TV. •Check the antenna/cable connection. •Keep the antenna cable away from other connecting cables. Picture or sound noise when viewing a TV channel•Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page26). Some tiny black points and/or bright points appear on the screen•The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. Picture contours are distorted•Change the current setting of “Cinema Drive” to other settings (page21). No colour on programmes•Select “Reset” (page21). No colour or irregular colour when viewing a signal from the Y, PB/CB, PR/CR jacks of / •Check the connection of the Y, PB/CB, PR/CR jacks of / and check if each jacks are firmly seated in their respective jacks. No picture from the connected equipment appears on the screen•Turn the connected equipment on. •Check the cable connection. •Press to display the connected equipment list, then select the desired input. •Correctly insert the memory card or other storage device in the digital still camera. •Use a digital still cam...
Questo manuale è adatto anche per i modelli :TV - KDL-32BX320 (4.92 mb)
TV - KDL-40BX420 (4.92 mb)