valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
(Normally, fine tuning is performed automatically.) 1 Press M/m to adjust the fine tuning over a range of -15 to +15, then press OK. 2 Press OK twice. To restore automatic fine tuning, select “On” in step 1. 32 GB Option Audio Filter Skip Description Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. 1 Press M/m to select “Low” or “High”, then press OK. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting “Off”. 2 Press OK to select “Confirm”, then press OK. Note You cannot receive stereo or dual sound when “Low” or “High” is selected. Skips unused analogue channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) 1 Press M/m to select “Yes”, then press OK. 2 Press OK to select “Confirm”, then press OK. To restore a skipped channel, select “No” in step 1. Decoder Records the scrambled channel selected when using a decoder connected to the scart connector / 2 either directly or via a VCR. Note Depending on the country/region selected for “Country” (page 29), this option may not be available. 1 Press M/m to select “On”, then press OK. 2 Press OK to select “Confirm”, then press OK. To cancel this function afterwards, select “Off” in step 1. ATT Attenuates the RF signal. In case of a strong RF signal, some video interference may be displayed. 1 Press m/M to select “On”, then press OK. 2 Press OK to select “Confirm”, then press OK. Tip This option cannot be used if “AV2 Output” is set to “D-TV” (page 26) Using the Menu Continued 33 GB Digital Set Up Displays the “Digital Set Up” menu. You can change/set the digital settings using this menu. 1 Press OK to select “Digital Set Up”. 2 Press m/M to select the desired icon below, then press OK. Programme List Edit Digital Manual TuningDigital Auto TuningDigital TuningExit:Enter:Select: OK MENU Digital Tuning menu 3 Press m/M to select one of the following options, then press OK. Option Description Digital Tuning Digital Auto Tuning Tunes in all the available digital channels. Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 13). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). 1 Press OK to start digital auto-tuning. When all available digital channels have been tuned, a message stating that the auto-tuning process is finished appears. 2 Press < . Programme Removes any unwanted digital channels stored on the TV, and List Edit changes the order of the digital channels stored on the TV. 1 Press m/M to select the channel you want to remove or move to a new position. If you know the channel number (frequency) Press the number buttons to enter the three-digit programme number of the broadcast you want. To display the previous or next five channels Press the red button (previous) or the green button (next). 2 Remove or change the order of the digital channels as follows: To remove the digital channel Press OK. A message that confirms whether the selected digital channel is to be deleted appears. Press < to select “Yes”, then press OK. To change the order of the digital channels Press ,, then press m/M to select the new position for the channel and press OK. Repeat the procedure in step 2 to move other channels if required. 3 Press <. Tip functions are available only for DVB countries (page 2) 34 GB Option Description Digital Manual Tunes the digital channels manually. Tuning 1 Press the number button to select the channel number you want to manually tune, then press m/M to tune the channel. 2 When the available channels are found, press m/M to select the channel you want to store, then press OK. To display the previous or next five channels Press the red button (previous) or the green button (next). 3 Press m/M to select the programme number where you want to store the new channel, then press OK. Repeat the procedure above to tune other channels manually. Digital Set-up Displays digital subtitles on the screen. Subtitle Setting Press m/M to select “Off”, “Basic”, or “For Hard of Hearing”, then press OK. When “For hard of hearing” is selected, some visual aids may also be displayed with the subtitles (if TV channels broadcast such information). Subtitle Selects which language subtitles are displayed in. Language Press m/M to select the language, then press OK. Audio Selects the language used for a programme. Some digital channels Language may broadcast several audio languages for a programme. Press m/M to select the audio language, then press OK. Audio Type Increases the sound level (only for Hard of Hearing). Press m/M to select “Basic” or “For Hard of Hearing”, then press OK. Parental Lock Sets an ...
Questo manuale è adatto anche per i modelli :TV - KDF-E50A11E (11.82 mb)