valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• PROGRAM -/+ (- P +): to select programmes. Rear of set : The main connections are made at the bottom of the television. For more details on connections see page 12. Do not remove the protective sheet until you have completed the stand/wall mounting and connections e Power socket “ TV and radio aerial sockets ‘ EXT1 socket ( DVI-I input for connecting a HD (high definition)* equipment or computer with DVI output. § Side connections * Depending on version. Remote control CR 2025 Pull out the plastic insulation sheet from the battery, this will activate the remote control. The battery supplied with the appliance does not contain mercury or nickel cadmium so as to protect the environment. Please do not discard your used batteries, but use the recycling methods available (consult your distributor). Remote Control Keys for LCD TV Functions 1) . (STANDBY) To set the TV to standby mode.To switch the TV set on again, press P –/+, 0 to 9 or AV keys. 2) Sleeptimer To select the length of time before the set automatically switches to standby (from 0 to 240 minutes) 3) AV To display Source List to select TV or peripheral equipment connected to EXT1, AV/S-VHS, PC, HD or Radio (p. 12). 4) OYA Teletext keys (p. 9) 5) Unused key. 6) MENU To call up or exit the TV menus. 7) . Screen Format (p. 8) 8) Cursor (<>..) These 4 keys are used to move around the menus. 9) Volume To adjust the sound level. 10) . m Smart picture and sound Used to access a series of predefined picture and sound settings. The personal position relates to settings selected from the menus. 11) E Screen information To display / remove the programme number, the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Remote Control Keys for LCD TV Functions (12 (13 (14 (15 (16 (17 (18 (19 12) . List of programmes To display / clear the list of programmes. Use the keys <> to select a programme and the key . to display it. 13) u Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual I or Dual II. The Mono indication is red when in forced position. 14) Q Surround Sound To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects. 15) ¤ Teletext (p. 9) 16) [ Mute To mute or restore the sound. 17) P -/+ Selecting TV programmes To move up or down a programme. The number and the sound mode are displayed for a few seconds. For some TV programmes the title of the programme appears at the bottom of the screen. 18) 0/9 Numerical keys For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered before the dash disappears. 19) A Previous programme To access the previously viewed programme. * Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbols are trademarks of Dolby Laboratories. Installing your television set Positioning the television set 1 Place your TV on a solid stable surface.To avoid danger do not expose the TV to water,or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear. 2 Connecting the aerials • Insert the radio aerial lead into the FM ANT socket located at the rear of the TV. • Insert the aerial plug into the : socket at the rear of the set. • Connect the power lead to the television and the mains plug into the wall socket (220-240V/50 Hz). • Ensure the power cord is fully inserted in the TV mains socket and the wall socket. For connecting other appliances see page p.12. Switching on To switch on the set,press the POWER key. A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode (red indicator), press the P -/+ key on the Please handle with care and wipe with a soft remote control. cloth to ensure your TV keeps looking new. The indicator will flash when you use the remote control. 3 Quick installation When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country and language for the menus: Plug’n’Play Country I GB . Language I English . If the menu is not displayed, press the MENU key to display the menu. & Use the <> keys on the remote control to select your country and validate with .. If your countr y does not appear in the list, select choice “. . .” e Next select your language using the <> keys and validate with .. “ The search starts automatically. All the available TV programmes and radio stations will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of the search, the menu disappears. To exit or interrupt the search, press MENU. If no programme is found, consult the...