valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio Out delay on the TV. To switch off Audio Out delay, press h and select S Setup and press OK. Select TV settings > Sound > Audio Out delay. Select Of f and pres s OK. Audio Out Offset If you cannot s et a delay on the Home Theatre System, you can s et the TV to s ync the s ound. To synchronize the sound on the TV, press h and select S Setup and press OK. Select TV settings > Sound > Audio Out of f set. Use the slider bar to set the sound offset and press OK. The value set compens ates the time neces s ary for the Home Theatre System to proces s the s ound of the TV picture. You can s et the offset in steps of 5ms. Maximum setting is -60ms. The Audio Out delay setting should be switched on. Audio Out Settings Audio Out format Setting up / Connect devices 11 The standard setting for Audio Out format is Multichannel. Home Theatre Systems with multichannel s ound capabilities (Dolby Digital, DTS® or similar) can receive a compressed multichannel sound signal from a TV channel or a connected dis c player. To set the Audio Out format, press h and select S Setup and pres s OK. Select TV settings > Sound > Audio Out format. If you have a Home Theatre Sys tem without any multichannel sound processing capabilities, select Stereo . Audio Out levelling Use the Audio Out levelling setting to level the volume (loudnes s ) of the TV and the Home Theatre Sys tem when you s witch over from one to another. Volume differences can be caused by differences in sound proces s ing. To level the difference, press h and select S Setup and pres s OK. Select TV settings > Sound > Audio Out levelling. If the volume difference is large, select More. If the volume difference is small, s elect Less. Audio Out levelling affects both the Audio Out -Optical and HDMI-ARC sound signals. Blu-ray Disc Player Use an HDMI cable to connect the Blu-ray Disc player to the TV. If the Blu-ray Disc player has Eas yLink HDMI CEC, you can operate the player with the TV remote control. In Help, press L List and look up EasyLink HDMI CEC for more information. DVD Player Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable if the device has no HDMI connection. If the DVD player is connected with HDMI and has EasyLink HDMI CEC, you can operate the player with the TV remote control. In Help, press L List and look up EasyLink HDMI CEC for more information. Game Connect a game console to the side or back of the TV. You can use an HDMI, YPbPr or SCART connection. If your game cons ole only has Video (CVBS) and Audio L/R output, use a Video Audio L/R to SCART adapter to connect to the SCART connection. For bes t quality, us e an HDMI cable to connect the game cons ole to the s ide of the TV. If the game console is connected with HDMI and has EasyLink HDMI CEC, you can operate the game console with the TV remote control. Alternatively, use a SCART adapter (not supplied) to connect the game console to the TV. 12 Setting up / Connect devices USB Hard Drive What you need If you connect a USB Hard Drive, you can pause or record a TV broadcas t. The TV broadcas t needs to be a digital broadcas t (DVB broadcas t or s imilar). Als o, you can connect a USB Hard Drive to watch movies from an online video s tore (Video On Demand). To watch rental videos If you are connected with the Internet, you can rent a movie from an online video s tore. Open Smart TV and start a rental video App from the App gallery. To download a rental video, you can connect a 8GB USB flash drive but alternatively, you can us e a USB Hard Drive. When installing the USB Hard Drive, you can select if you also want to use the USB Hard Drive for rental videos. Even when the rental video s tore uses video s treaming, you might need the USB Hard Drive to store some video buffer. To pause To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB Hard Drive space and a minimum writing speed of 30MB/s. To reco rd To pause and record broadcasts, you need a Hard Drive with a minimum of 250GB Hard Drive space. TV guide Before you decide to buy a USB Hard Drive to record, you can check if you can record digital TV channels in your country. Pres s Guide on the remote control. If there is a Record button on the TV guide page, you can record programmes from digital TV channels. If the Record button is not available, check if the TV guide is updated from the Internet. To check if the TV guide gets its data from the Internet, press h and select S Setup and press OK. Select TV settings > General settings > TV guide. Select From the Internet and press OK. In Help, press L List and look up USB Hard D rive, Installation to install a USB Hard Drive on this TV. I nstallation Before you can pause or record a broadcast, you must connec...
Questo manuale è adatto anche per i modelli :TV - 55PFL7007T/12 (2.37 mb)
TV - 46PFL7007T/12 (2.37 mb)