valutazioni - 0, GPA: 0 ( )

Produttore : Philips File Size : 15.68 mb File Nome : Lingua di insegnamento:

Once tuned, change channels at the cable box, not the TV. Note: This connection will not supply stereo sound to the TV. The reason is that the RF output on a cable box - labeled TO TV, OUT or OUTPUT for example - will not send a stereo signal to the tuner (VHF/UHF) input on a TV. -Cable box with A/V outputs • Connect the incoming cable TV signal 1 to a signal splitter (not supplied). The signal splitter enables you to avoid having to use the TO TV jack on the back of the cable box. This jack will not supply stereo sound to the TV. Note: Your cable box may have a different label for the TO TV jack, such as OUTPUT or OUT. • Connect a coaxial cable (not supplied) to a connector on the signal splitter and to the CABLE/ANTENNA 75 . : jack 2 on the TV. • Connect another coaxial cable (not supplied) to a connector on the signal splitter and to the cable IN jack 3 on the back of the cable box. • Connect A/V cables (not supplied) to the VIDEO and AUDIO L and R outputs on the back of the cable box and to the AV2 video (labeled VIDEO) and AUDIO (labeled L and R) jacks 4 on the back of the TV. • To view programs from your cable box, first press the SOURCE button on the remote control. • Press the cursor down or up buttons until the AV2 signal source is selected. • Press the OK button to confirm your selection. The AV2 input source becomes current for the viewing of cable TV programs through your cable box. Note: If your cable box Audio/Video outputs will not supply video and stereo audio to the TV, you will need to make the connection shown above in the example “Cable box with RF IN/OUT”. English 3 75 CABLE English 75 CABLE English -Cable box with S-Video, component video (YPbPr) or HDMI connectors -Antenna Via antenna you can watch whatever DTV programs being broadcast in your area for free. If you’re not sure what HDTV programming is available in your area, contact your local content provider or your local electronics store retailer. Broadcasters are in the middle of a transition from analog to digital TV. This means that a given broadcaster will have two channels on the air, one analog and one digital. Connect the incoming antenna signal to the CABLE/ANTENNA 75 . : jack at the bottom of the TV. Note: This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching. - Direct Broadcast Satellite (DBS) Satellite systems offer many of the same premium channels as cable systems, and often at a lower price. To get these channels, you’ll need to install a small dish antenna outside. There are 2 main DBS systems: DirecTV & DishNetwork. These systems require separate, proprietary set top receiver boxes to decode their signals and send them to your digital TV set. These boxes may include a digital TV tuner for off- air DTV broadcasts. Satellite broadcasters also provide major local channels, depending on the market in which you live. DBS also provides service in areas not covered by cable because they are in rural areas or other areas not passed by a cable line. DBS also allows you to watch pay-per-view events. e Before installing your TV or before hanging it on the wall, connect all your accessory devices. “ Refer to the bottom of the set for the correct operation voltage. Insert the power cord in the wall socket. Consult your local dealer if your mains supply is different. To prevent damaging the mains (AC) cord which could cause a fire or electric shock, do not place the TV on the cord. ‘ Remote control: Insert the 2 batteries supplied (Type R6-1,5V). Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.) The batteries supplied do not contain the heavy metals mercury and cadmium. Please check on how to dispose of exhausted batteries according to local regulations. ( Turn the TV on: Press the power switch . at the side of the TV. You may also press +CH-or POWER button on the remote control. The TV can take up to 15 seconds to power up. A blue indicator light on the front of the TV lights up. 4 First time installation First time installation Note: The first time (and only the first time) you turn on your set you see an installation introduction screen. The Installation procedure consists of a series of screens that guide you through the process. & After an introduction screen, you are asked to select a language of the TV’s on-screen-menus. (The text of the header and the info on screen continuously change language.) e Press the cursor up/down to highlight your language. “ Press the OK button. ‘ Follow the on-screen instructions to proceed. Part 1: TV installation (Please skip this section if you have no cable connected to the Antenna input of the TV, and continue with Part 2.) Note - The TV will take approximately 10-15 seconds to start up. & Select the desired Language and press the green button "Next". e Select Cable or Antenna in the Installation mode and press the green button "Next". “ Auto Installation may take 20 to 40 minutes depending on...

Scarica la tua

Per scaricare, digitare 2 cifre :