valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
While you watch TV, press the Menu button and, the Power Save Mode settings can be found in the ‘Picture’ section of the Main Menu. • Picture off mode: If you only want to listen to audio from the TV, you can switch off the display. Other functions continue to operate normally. While you watch TV, press Menu and select Picture, and from there select ‘Picture off’ under the Power Save Mode option. • Note: Disconnect your TV from the mains plug in case your TV is going to be inactive for a long time. TV scroll button The TV Scroll button on the side of the TV allows you to control the volume, change channels and put the TV into standby. To change volume: Increase the volume by scrolling up. Decrease the volume by scrolling down. To change channel: 1. Press the middle of the scroll button, the channel information banner will appear on screen. 2. Scroll through the stored channels by pushing the button up or down. To change source: 1. Press the middle of the button twice, the source list will appear on screen. 2. Scroll through the available sources by pushing the button up or down. To switch the TV to standby: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode. Switching on/off To switch the TV on To switch on the TV from standby mode either: • Press the “ ” button, CH- or CH+ or a numeric button on the remote control. • Press the side function switch until the TV comes on from standby. Note: If the TV has been left on and not been operated for a while, the TV will go into standby. When you next switch-on, the following message will be displayed. “Standby Cause No Operation” Press OK to continue. To switch the TV off • Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode. Note: To power down the TV completely, unplug the power cord from the mains socket. First time installation You will see the language selection screen when you first turn on your TV. Select your preferred language and press OK followed by the selection Home Mode/ Shop Mode. You can set up your TV by following the First Time Installation (FTI) screen with the following selections. Aerial installation Select the AERIAL option from the Search Type screen to search for terrestrial digital TV broadcasts. Optional a channel list, which is generated by LCN (*), will be displayed on screen when the search is over. Select “Yes” and press OK to store this list. Press “ ” button to quit channel list and watch TV. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). Cable installation Select CABLE option and press OK on the remote control. For automatic installation in case your Cable network supplier supports a Network-ID based installation (e.g. Unitymedia), select YES in following screen and press OK. In case your Cable network supplier does not support a Network-ID based installation please select “NO”, press OK and follow the instruction on the screen. You can also select frequency ranges from this screen. Enter the frequency range manually by using the numeric button. Note: Searching duration will change depending on the selected search step. English - 3 Loop/Shuffle Mode Operation Start playback with and activate TV plays next file and loop the list. Start playback with OK and activate File will be played in a loop (repeat). Start playback with OK/ and activate File will be played in a shuffle. Start playback with OK/ and activate File playback will continue randomly and random playback will continue. Media browser menu Satellite installation If you select Satellite option from the Search Type screen, you can set a satellite and watch satellite channels. When you select Satellite installation, Antenna Type menu will be displayed. There are three types of antenna selection. You can select Antenna type as Direct, Unicable or DiSEqC switch by using “ ” or “ ” buttons. Direct: If you have a single receiver and a direct satellite dish, select this antenna type. After selecting Direct, another menu screen will be displayed. Select an available satellite by using cursor left or cursor right, after your selection you have 2 possibilities to continue installation, a full or a quick installation: 1. Press the green button and select “NO” followed by “OK” to perform a full scan and search for all available services on the selected satellite. 2. Press the green button and select “YES” followed by “OK” to load a predefined channel list and confirm with (very quick installation, all main services per country installed). Unicable: If you have multiple receivers and an unicable system, select this antenna type. Press OK to continue. Configure settings by following instructions on the screen. For full or quick installation follow the instructions under “Direct”. DiSEqC switch: If you have multiple satellite dishes and a DiSEqC switch, select this antenn...