valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Read it carefully before you star t the installation and setup. • The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. • To completely disconnect the power input, the mains plug of the product shall be disconnected from the mains. • Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. • No naked flame sources, such as lighted candles, should be placed on the product. Recycling Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recover y and recycling system. © 2010 Koninklijke Philips Electronics N.V. All rights reser ved. Reproduction in whole or in par t is prohibited without the written consent of the copyright owner.Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: 4 EN 2 Your SDV6121/12 Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. 7 Overview 1 English 6 5 1 100-240V AC/6V DC power adaptor (included) 2 Gain control knob 3 VHF antenna 4 UHF antenna 5 Built-in coaxial cable connected to signal output (for TV connection) 6 6V DC power connection 7 Antenna stand 3 4 2 EN 5 3 Get started To ensure the antenna to work properly, read the user manual of your television before you star t. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is impor tant for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal sur face to avoid inter ference. Connect to the TV 1 One end of the coaxial cable is already connected to the signal output of the antenna. 2 Connect the other end to the input on the TV receiver. 3 Connect the DC plug to the antenna and the power supply to a 100-240V AC outlet. Note • Ensure you position your antenna on a flat sur face. 6 EN 7 English EN Note It is possible to turn t •• he gain control knob down for best reception. For UHF reception 1 Turn the TV to the desired channel/ station. 2 To turn the amplifier up, rotate the gain control knob towards the max position. 3 Tilt or swivel the UHF antenna towards the transmitter until the reception is achieved. 4 Set up SDV6121/12 For VHF/FM reception 1 Extend the telescopic dipoles to the longest possible length. 2 Turn the TV or FM radio to the desired channel/station. Move the dipoles in different directions up and down until the reception is achieved. 3 To turn the amplifier up, rotate the gain control knob towards the max position. Note • It is possible to turn the gain control knob down for best reception. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is par t of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the T V. Tune to the analogue channels and find the best antenna location. Then reconnect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 8 EN 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with HD-DVB broadc...