valutazioni - 2, GPA: 3
(
)
)
|
Facilità d'uso
*3 Specified standby power is reached after the TV finishes necessary internal processes. *4 4 hours a day and 365 days a year. Design and specifications are subject to change without notice. Additional Continued 37 GB PC Input Signal Reference Chart for PC IN PC Input Signal Reference Chart for PC IN Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA WXGA 1280 768 47.8 60 VESA WXGA 1360 768 47.7 60 VESA SXGA 1280 1024 64 60 VESA UXGA 1600 1200 75 60 VESA HDTV 1920 1080 67.5 60 EIA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. PC Input Signal Reference Chart for HDMI IN 1, 2, 3 and 4 Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA WXGA 1280 768 47.8 60 VESA WXGA 1360 768 47.7 60 VESA SXGA 1280 1024 64 60 VESA 38 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. Press 1 on the side of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre. If the red LED flashes 19 times, please switch off the set and remove the faulty USB device. If the red LED flashes 20 times, please switch off the set and remove the faulty CAM device. When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. z • You can refer to the complete troubleshooting section in the on-screen instruction manual. • For further information, please contact Sony Customer Information Centre at the address or telephone that appears on the supplied guarantee. Picture No picture (screen is dark) and no sound • Check the aerial/cable connection. • Connect the TV to the mains, and press 1 on the side of the TV. •If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information fromequipment connected to the scart connector • Press to display the connected equipment list, then select the desired input. • Check the connection between the optional equipment and the TV. Double images or ghosting • Check the aerial/cable connection. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Picture or sound noise when viewing a TVchannel • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 29). Some tiny black points and/or bright points appear on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” (page 25). No colour or irregular colour when viewing a signal from the COMPONENT IN sockets • Check the connection of the COMPONENT IN sockets and check if each sockets are firmly seated in their respective sockets. Sound No sound, but good picture • Press 2 + or % (Mute). • Check if the “Speaker” is set to “TV Speaker” (page 26). • When using HDMI input with Super Audio CD or DVD- Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals. Channels The desired channel cannot be selected • Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank • Scrambled/Subscription only channel....
Questo manuale è adatto anche per i modelli :TV - KDL-32BX300 (1.81 mb)
TV - KDL-32BX400 (1.81 mb)
TV - KDL-40BX400 (1.81 mb)
TV - KDL-22EX302 (1.81 mb)