valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
• System Update: Enables the TV to automatically receive free software updates through your existing aerial/antenna/cable (when issued). We recommend that you leave the setting to “On” at all times. • System Information: Displays the current software version and the signal level. • Time Zone: Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/ area. • Auto DST: Select “On” to automatically switch between summer time and winter time according to the calendar. 104/119 Digital Set-up • Service Replacement: Select “On” to automatically change the channel when broadcaster changes transmission of the viewing programme to a different channel. CA Module Set-up Provides access to a pay TV service after you obtain a Conditional Access Module (CAM) and a view card. See the location of the (PCMCIA) socket (36). 105/119 Network Settings Network • IP Address Settings: -Manual: Allows you to set the network settings according to your network environment. - DHCP (DNS manual): Automatically acquires the network settings except for DNS server settings. You can manually set the DNS settings. - DHCP (DNS automatic): Automatically acquires the network settings through the Dynamic Host Configuration Protocol server function of the router or Internet service provider. • Test: Diagnoses whether the network is correctly connected. • IP Address/Subnet Mask/Default Gateway/ Primary DNS/Secondary DNS: You need to configure each item when “Manual” is selected in “IP Address Settings”. When “DHCP (DNS manual)” is selected, be sure to enter “Primary DNS” and “Secondary DNS” server addresses manually. • MAC Address: Displays the “MAC address”, which is a fixed, globally unique identifier of the network device. Server Display Settings Displays the connected server list and allows you to select the server you want to display on the Home Menu. 106/119 Network Settings Server Diagnostics Diagnoses whether the TV can connect to each server on the home network. Renderer Function Enables playback of photo/music/video files on the TV through other control devices on the network, such as a digital still camera or mobile phone. Renderer Access Control Allows you to specify the accessible controller to the TV. When this setting is set to “On”, you can playback Photo/Music/Video files on the TV using the controller. Renderer Set-up • Automatic Access Permission: Allows you to select whether to permit access to the TV automatically when a network device accesses the TV for the first time. • Renderer Name: Allows you to set the name of the TV to be shown on the controller. 107/119 Troubleshooting Check whether the (standby) indicator is flashing in red. When the (standby) indicator is flashing The self-diagnosis function is activated. 1 Count how many times the (standby) indicator flashes between each two second break. For example, the indicator may flash three times, go off for two seconds, then flash again three t...
Questo manuale è adatto anche per i modelli :TV - KDL-22E5300 (12 mb)
TV - KDL-22E5310 (12 mb)
TV - KDL-32E5500 (12 mb)
TV - KDL-32E5510 (12 mb)