valutazioni - 5, GPA: 4.2 ( )

Produttore : Sony File Size : 4.25 mb File Nome : Lingua di insegnamento:

Access Module For details, refer to the instruction (CAM) J manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. ~ CAM is not supported in all countries. Please check with your authorized dealer. Hi-Fi audio Connect to the audio output sockets equipment F to listen to the sound from the TV on Hi-Fi audio equipment. Additional operations To Do this Return to normal TV Press DIGITAL or ANALOG. mode Access the Digital Press . Favourites (in digital For details, see page 16. mode only) Change the volume of Press 2 +/-. the connected HDMI control compatible audio system Mute the sound of the Press % . connected HDMI Press again to restore. control compatible audio system 18 GB Using the Tools menu Press TOOLS to display the following options when viewing pictures from connected equipment. Options Description Close Closes the Tools menu. Picture Mode (except PC input mode) See page 21. Display Mode (in PC input mode only) See page 21. Sound Effect See page 23. Speaker See page 24. PIP (in PC input mode only) See page 19. H Centre (in PC input mode only) See page 26. V Lines (in PC input mode only) See page 26. Sleep Timer (except PC input mode) See page 26. Power Saving See page 25. To view two pictures simultaneously – PIP (Picture in Picture) You can view two pictures (PC input and TV programme) on the screen simultaneously. Connect a PC (page 17), and make sure that images from a PC appear on the screen. ~ You cannot display resolutions higher than WXGA (1280 . 768 pixels). 1 Press TOOLS to display the Tools menu. 2 Press F/f to select “PIP”, then press . The picture from the connected PC is displayed with full size and the TV programme is displayed on the right corner. You can use F/ f/G/g to move the TV programme screen position. 3 Press number buttons or PROG +/- to select the TV channel. To return to single picture mode Press RETURN. z You can switch the audible picture by selecting “PC Sound/ TV Sound” from the Tools menu. Using HDMI control The HDMI control function allows equipment to control each other using HDMI CEC (Consumer Electronics Control) specified by HDMI. You can perform interlocked control operations between Sony HDMI control compatible equipment such as a TV, DVD recorder with hard disk and audio system by connecting the equipment with HDMI cables. Be sure to correctly connect and set the compatible equipment to use the HDMI control function. To connect the HDMI control compatible equipment Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, in addition to the HDMI cable, be sure to also connect the audio output socket of the TV and the audio system. For details, see page 17. To make the HDMI control settings HDMI control must be set on both the TV side and the connected equipment side. See HDMI Set-up (...

Scarica la tua

Per scaricare, digitare 2 cifre :