valutazioni - 3, GPA: 4.3
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
TV - KDL-26EX302 (8.93 mb)
TV - KDL-26EX302 (9.13 mb)
Facilità d'uso
2 Press 1 on the side of the TV. When you turn on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV, the power indicator light up in green. 3 Press F/f to select the language displayed on the menu screens, then press . KDL-32NX5xx KDL-40NX5xx 3,4,5 4 Press F/f to select the country/region in which you will operate the TV, then press . 4 Press F/f to select the country/region in which you will operate the TV, then press . If the country/region which you want to use on the TV does not appear in the list, select “-” instead of a country/region. 5Press F/f to select the location type in which you will operate the TV, then press . In Shop mode, some settings will be periodically reset for Shop usage. This option selects the initial picture mode appropriate for the typical lighting condition in these environments. 7: Auto-tuning the TV 1 Press . 2 Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 7). The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connections and press to start auto-tuning again. 3 Programme Sorting (Only in analogue mode): Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press . If you do not change the order in which the analogue channels are stored on the TV, press HOME to go to next step. ~ • This step will not appear if any analogue channel is found. The message "Set-up complete" will appear on the screen. Press . The TV has now tuned in all the available channels. z • System Update You can update the TV system using USB memory. Obtain information from the website below. To tune the TV for Cable connection 1 Press . 2 Press F/f to select “Quick Scan” or “Full Scan”, then press . "Quick Scan" : channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for "Frequency" and "Network ID" is "Auto". This option is recommended for fast tuning when supported by your cable operator. If the "Quick Scan" does not tune, please use the "Full Scan" method below. "Full Scan" : All available channels are tuned and stored. This procedure may take some time. This option is recommended when "Quick Scan" is not supported by your cable provider. For further information about supported cable providers, refer to support web site: 3 Press G/g/f to select “Start”. The TV starts searching for channels. Do not press any butt...
Questo manuale è adatto anche per i modelli :TV - KDL-32BX300 (1.08 mb)
TV - KDL-32BX400 (1.08 mb)
TV - KDL-40BX400 (1.08 mb)
TV - KDL-22EX302 (1.08 mb)