|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
4 Select a device to connect. 5 Select Yes, when the connection request message appears. 6 If the device that you want to connect accepts the request, Miracast™/ Intel’s WiDi is connected. . Some models may provide the Intel’s WiDi function only. . When Wi-Fi Direct is set to Off, if you set Miracast™/Intel’s WiDi to On, Wi-Fi Direct is automatically set to On. . When you set the Miracast™ / Intel’s WiDi function to Off, Wi-Fi Direct returns to the previous setting. . It is recommended to connect a laptop using Intel’s WiDi within close range. . Though Intel’s WiDi can be connected without a wireless router, it is recommended to connect the wireless router first for optimal performance. . You may not connect your TV to a non-LG Electronics device even when it is detected. . It is recommended you to connect a device to a 5GHz router. . The response rate may vary depending on the user’s environment. . For more information on the device you want to connect to, refer to its owner’s manual. ..Setting.a.network.-.warning . Use a standard LAN cable (Cat5 or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN port). . Resetting your modem can cause network connection problems. To resolve the problem, turn the power off, disconnect and reconnect, and then turn the power back on. . LG Electronics is not responsible for any network connection problems or any faults, malfunctions and errors caused by an network connection. . A network connection may not work properly depending on the Internet service provider. . A DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a limited number of network connections may be available, and TV network setting may not be available depending on your contract with your Internet Service Provider (ISP). (If only one device is allowed per line and the PC is already connected, other devices cannot be used.) . Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. . The surrounding wireless environment can cause the wireless network service to run slowly. . If you do not turn off the entire local home network, network traffic may occur on some devices. . For an AP connection, an access point device that supports wireless connection is required and the wireless connection feature must be enabled on the device. Contact your service provider regarding availability of wireless connection on your access point. . Check the SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP. . Invalid settings on network devices (wired/wireless line sharer, hub) can cause the TV to run slowly or not operate properly. Install the devices correctly according to the appropriate manual and set the network. . Connection method may differ according to the AP manufacturer. ..What.is.Tag.On? Tag On is a data transmission technology that can be used on smartphones with NFC (Near Field Communication). Simply by tapping your smartphone to a Tag On sticker, you can share content between your smartphone and TV. To connect your smartphone to the TV using Tag On, they must be connected on the same Wi-Fi network or Miracast™/Intel’s WiDi of the smart TV is set to On. . Do not attach the sticker to a metal part of the TV. Otherwise, your smartphone cannot recognise the Tag On sticker. smartphone cannot recognise the Tag On sticker. . Do not crumple or fold the Tag On sticker. Otherwise, the Tag On is not recognised. . To purchase a Tag On sticker, please contact the LG Electronics Service Centre. . This function is supported only on a smartphone with Android 4.0 (ICS) or later. ..To.start.Tag.On.for.the.first.time To connect your smartphone to the TV using NFC, install the Tag On app on the smartphone and complete the authentication process. 1 Make sure that the smart TV is on the same network as your smartphone. If Wi-Fi cannot be enabled, go to SMART . Settings . Network . MiracastTM/Intel's WiDi and set to On. 2 Enable the smartphone's NFC function and set to Read/Write and P2PMode. For more information on enabling NFC and setting the mode, refer to the owner's manual of your smartphone. 3 Tap your smartphone to a Tag On sticker. Make sure to follow the instructions on the smartphone screen and install the Tag On app and LG TV Remote app. 4 Tap the smartphone to the Tag On sticker again. 5 Enter the pairing key displayed on the smart TV into the smartphone. When two or more TVs are detected, the pairing key is displayed only after the TV you want to connect to is selected in the device list. 6 When the connection is made properly, you can use Tag On. . The information of the connected TV is saved in the Tag On sticker. You can change or reset the information in the Settings menu of the smartphone T...
Questo manuale è adatto anche per i modelli :TV - 55EA980V (9.86 mb)
TV - 55EA8809 (9.86 mb)
TV - 55EA9809 (9.86 mb)
TV - 55EA980 (9.86 mb)