valutazioni - , GPA:
(
)
)
Produttore : Chauvet
File Size : 1.41 mb
File Nome : Q-Spot_160-LED_UM_-_Rev_01b-WO.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
Otherwise, the signals from the DMX controller may interfere with the signals from the master unit. The Operation chapter of this manual provides detailed instructions on how to configure the Master and Slave units. Color Wheel The Q-Spot™ 160-LED comes equipped with a Color wheel featuring nine colors and a white (open). Color Wheel Diagram CAUTION B&W Triangle - 200x184.gif Important Icon - B&W - 200x201.gif Q-Spot_160-LED_Gobo_Replacement_02.gif Q-Spot_160-LED_-_Gobo_Wheel_02.gif Gobo Wheel The Q-Spot™ 160-LED comes equipped with a gobo wheel featuring seven rotating and replaceable (slot-n-lock system) gobos. The gobo wheel has an eighth position with no gobo (open). Gobo Wheel Diagram Gobo Replacement The Q-Spot™ 160-LED features a gobo wheel that holds seven interchangeable, slot-n- lock gobos. These gobos can rotate at various speeds and in both directions. Follow the procedure below to change any of the gobos on the gobo wheel Always disconnect the fixture from the AC power before opening it. Procedure 1) Remove the gobo cover. 2) Remove the slot-n-lock gobo from the gobo wheel. 3) Using a small tool, pry the tension ring from the gobo holder. 4) Remove the old gobo. 5) Insert the new gobo, and replace in the reverse steps of removal. If using coated glass gobos, make sure that the more reflective side of the gobo (glass base) faces the light source. This way, the glass base of the gobo will provide extra isolation to its coating from the heat of the light source, thus minimizing the risk of damaging the gobo’s coating. Gobo Replacement Diagram Gobo cover Sliding knob Gobo Q-Spot_150-LED_-_Mounting_01c.gif Mounting Before mounting this fixture, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual). Orientation Always mount this fixture in any safe position while making sure that there is adequate room around it for ventilation, configuration, and maintenance. Rigging CHAUVET® recommends following the general guidelines below when mounting the Q- Spot™ 160-LED. • When selecting an installation location, consider ease of access to the fixture for operation, programming adjustments, and routine maintenance. • Make sure to mount this fixture away from any flammable material as indicated in the Safety Notes section. • Never mount the fixture in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect it. • If hanging this fixture, make sure that the location where you are mounting the fixture can support its weight. Please see the Technical Specifications section of this manual for the weight requirement of this fixture. Procedure You can mount the Q-Spot™ 160-LED on a flat, rigid surface or hang it from a truss. This fixture includes two mounting brackets for overhead mounting. You can attach a rigging clamp to . You must supply your own “C” or “O” clamps as well as your safety cable, making sure that they are capable of supporting the weight of this fixture. You need to use two clamps per fixture. Product Mounting Diagram Safety cable (not provided) C clamp (not provided) Mounting brackets (included) Notes Icon 03 - 200x227.gif Notes Icon 03 - 200x227.gif Q-Spot_160-LED_Control_Panel_01.gif 4. Operation Control Panel Description Button Function