valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
If you do, a loud noise emits from the speakers possibly causing damage to your hearing or to the speakers. Note Connecting the television to a camcorder To play back from a camcorder, connect the camcorder to the television as shown. Front of the TV Audio/Video cord (not supplied) To Audio/Video OUT Connecting the television to a video game console The television can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent connection variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's owner's manual for additional information. To Audio/Video OUT Audio/Video cord (not supplied) Front of the TV Video Game Console Starting setup The STARTING SETUP menu appears the first time you turn on the television, and helps you select the menu language, specify the TV/CABLE setting, and program your channels automatically. To complete initial television setup: 1 Make sure that the antenna or cable television system is connected. 2 Press POWER. The starting setup function begins and the language setup menu appears on the screen. 3 Press or to select your desired language, then press ENTER. 4 Press or to select TV or CABLE, then press ENTER. 5 Press or to select START, then press ENTER. If you select CANCEL and press ENTER, the STARTING SETUP stops and changes to the television screen. The AUTO SETUP starts. After the STARTING SETUP is completed, the television channel appears on the screen. Depending on the reception condition, it may take approximately ten minutes to complete memorizing digital cable channels. Note If you press EXIT in the process of AUTO SETUP, the STARTING SETUP stops and changes to the television screen. NS-27RTV 27-inch Color TV • When you make a menu selection, your Cable chart changes occur immediately. You do not have to press EXIT to see your changes. • When you are finished programming the menus, press EXIT. Using the menu To access the menu using the TV buttons: Press both of the volume and buttons at the same time. The menu screen appears To access the menu using the remote control: Press MENU. The menu screen appears. To select a setting using the TV buttons: Use the channel and buttons and volume and buttons. To select a setting using the remote control: Use the channel and buttons and volume and buttons. Setting the language You can choose from three different languages (English, French, and Spanish) for the on-screen displays. To select a menu language: 1 Press MENU. The menu screen appears. If no buttons are pressed for more than 15 seconds, the menu screen returns to normal television operation automatically. Note 2 Press or to select SETUP menu. 3 Press or select LANGUAGE. 4 Press or to select the desired language: English (ENGLISH), French (FRANCAIS), or Spanish (ESPANOL). 5 Press EXIT to return to the normal screen. Memorizing channels This television is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the television’s memory. This television can receive up to 250 VHF/UHF channels and 500 cable television channels. To use this television with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. Selecting TV or cable To select TV or cable input: 1 Press MENU. The menu screen appears. 2 Press or to select the SETUP menu. 3 Press or to select TV/CABLE. 4 Press or to select TV or CABLE. • TV—VHF/UHF channels • CABLE—Cable television channels 5 Press EXIT to return to the normal screen. The following chart is typical of many cable system channel allocations. The number on the top is the number on the television. The number or letter on the bottom is the corresponding cable channel. Automatic memory tuning To automatically memorize channels: 1 Press MENU. The menu screen appears. 2 Press or to select the SETUP menu, then press or to select AUTO CH MEMORY. 3 Press or . The television begins memorizing all of the channels available in your area. Depending on the reception condition, it may take approximately ten minutes to complete memorizing digital cable channels. Some new channels may be added. You should complete the AUTO CH MEMORY procedure periodically. Note Adding and deleting channels To add or delete channels: 1 Press MENU. The menu screen appears. 2 Press or to select the SETUP menu, then press or to select ADD/DELETE. 3 Press or . The ADD/DELETE menu appears. 4 Press or to select ADD/DELETE, then press . 5 Select the desired channel to be memorized or deleted using or . 6 Press or to select ADD or DELETE. 7 Repeat steps 5-6 for other channels you want to add or delete, then press ENTER. 8 Press EXIT to return to the normal screen. To return from the ADD/DELETE menu to t...