Log:
valutazioni - 3, GPA: 4 ( )

Istruzioni per l'uso Premier Mounts, Modello 9533-004-001-07

Produttore : Premier Mounts
File Size : 236.33 kb
File Nome : 05d02133-019d-4f1d-9f9c-b75584e878c0.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). Please review all WARNING and CAUTION statements (see Page 8) before beginning the installation of the PRC. AST-2446 (Qty 1) PRC-LA (Qty 1) The AST-2446 is not included with the PRC-LA. Customers may purchase the AST-2446 separately or use a custom length of 1-1/2” NPT. M4 x 10mm Phillips Pan Head (Qty 4) M6 x 8mm Set Screw (Qty 1) UFP-220 Adapter Plate (Qty 1) M4 x 10mm Flat Head Phillips Screws (Qty 6) M4 x 5mm Phillips Screws (Qty 4) Installation Tools Phillips Head Screw Driver Soft Material/ Blanket M3 Allen Wrench (Supplied) Pencil Tape Measure Socket Wrench 14mm Socket (Supplied) .” Open-End Wrench Level (Supplied) PRC Features: The PRC-LA allows tilt and pivot adjustments ±15° from center, 360° side-to-side swivel, and cable access. The AST-2446 allows height adjustment from 24 to 46 inches. Plus it also features two cable access openings. PRC-LA M6 x 6mm Set Screw Coupler Swivel Lock Keyhole Mount Opening Keyhole Mount Opening VESA 75 x 100 Mounting Points Ceiling Plate Ceiling Plate Cable Access Cable Access Opening Opening Lower Tube The AST-2446 may be substituted for a custom pre-cut length of threaded 1-1/2” NPT pipe. Page - 4 - Installation Manual PRC AST-2446 Installation If the AST-2446 will not be used to mount the PRC, then a suitable piece of threaded pipe can be used. These instructions will tell the user how to mount an AST-2446 to the ceiling. If a custom piece of threaded pipe is used, it is the responsibility of the user to determine how best to mount the PRC and pipe. Single Stud Installation – Wood screws (Commercially Available) Solid Surface Installation – Concrete wedge anchors (Commercially Available) 1. Secure the ceiling plate to the ceiling structure. 2. Use suitable hardware (commercially available) depending on your installation environment to secure the two (2, or 4, depending on the structure) mounting points found on the ceiling plate to the ceiling structure. Four Outer Points are for Solid Surface Installation Two Inner Points are for Single Stud Installation Ceiling Surface Ceiling Plate Mounting Hardware 3. To adjust the height of the AST-2446, remove the adjustment screws (Page 4), determine the desired height, and re-insert the adjustment screws to lock the AST-2446 into the desired position. Installation Manual Page 5 PRC PRC Installation 1. Screw the PRC-LA coupling adapter to the AST-2446 adapter or 1." (NPT) Pipe. 2. Secure the coupling with the M6 set screw (supplied). Adjustable Suspension Adapter Coupling Keyhole Opening Mounting Plate Display Installation 1. Place the display on a soft flat surface, face down. 2. Insert the two upper screws (thread on 3 turns). Do not insert the lower screws at this time. Mounting Hardware Display 3. Lift the display and carefully guide the display with the two screws into the keyhole openings. Keyhole Opening 4. Let the display rest in this position while you insert the lower mounting screws. 5. Tighten both the upper and lower mounting screws at this time. Do not over tighten the screws to the monitor. Failure to do so could result Lower Mounting Screws in damaging the monitor or the mounting points. If your flat panel has a 200mm x 100mm mounting pattern, the UFP-220 Adapter Plate must be used. Page 6 Installation Manual PRC Installation Manual Page - 7 - UFP-220 Adapter Plate (Optional Installation) Tension Adjustment 1. Attach the UFP-220 Adapter Plate to the back of the display using the six (6) M4 x 10mm flat head screws. 2. Attach the PRC mounting plate to the back of the UFP-220 using the four (4) M4 x 5 mm screws. 1. Swivel Adjustment – Use a .” wrench to tighten and loosen the swivel adjustment. 2. Tilt Adjustment - Use a 14mm socket to tighten and loosen the tilt adjustment. 3. After everything has been tightened and the orientation has been determined, tighten the set screw using the supplied M3 Allen wrench. VESA 75 M4 x 5mmPhillips Head Screws M4 x 10mmFlat Head Screws UFP-220 M6 x 6mm Set Screw Swivel Tension Tilt Tension Technical Specifications All measurements are in inches (mm). PRC Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original installation of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs. What is Not Covered; Limitations PREMIER MOUNTS DISCLAIMS ANY LIA...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie