valutazioni - , GPA:
(
)
)
Produttore : AOC
File Size : 2.2 mb
File Nome : f54426c7-5bea-b274-0574-f8677183c8bd.pdf
Lingua di insegnamento: 
Il documento viene caricato, si prega di attendere
 |
Il documento viene caricato, si prega di attendere
Facilità d'uso
2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV group on the rear of the HDTV. 3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video output on your DVD player and connect the other end to the audio connectors associated with the AV input on the rear of the HDTV. 4. Turn on the power to the HDTV and DVD player. 5. Select S-Video (Video 2) using the INPUT button on the remote, side of the HDTV, or directly by pressing the AV button on the Remote Control. Using Composite (AV) Video Connecting your DVD Player (Good) 1. Turn off the power to the HDTV and DVD player. 2. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV group. 3. Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red color) and L (white color) audio input connectors in the AV group. 4. Turn on the power to the HDTV and DVD Player. 5. Select Composite (Video 1) using the INPUT button on the remote, side of the HDTV or directly by pressing the AV button on the Remote Control. 27 28 Connecting Your VCR or Video Camera 1. Turn off the HDTV and VCR or Video Camera. 2. Connect the S-Video jack on the rear of your VCR or Video Camera to the S-Video jack in the AV group on the rear of the HDTV. 3. Connect an audio cable (white and red connectors) cable to the audio output connectors associated with the S-Video output on your VCR or Video Camera and connect the other end to the audio connectors associated with the AV input on the rear of the HDTV. 4. Turn on the power to the HDTV and VCR or Video Camera. 5. Select S-Video (Video 2) using the INPUT button on the remote, side of the HDTV or directly by pressing the AV button on the Remote Control. Note: Refer to your VCR or Video Camera user manual for more information about the video output requirements of the product. 29 Connecting to a PC Computer 1. Turn off the power to the HDTV and PC Computer. 2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input at the rear of the HDTV. 3. Connect the Audio Out on your pc computer to the RGB PC Audio input at the rear of the HDTV. 4. Turn on the HDTV and PC Computer. 5. Select RGB using the INPUT button on the remote, side of the HDTV or directly by pressing the RGB button on the Remote. Note: For the best picture quality when connecting a PC computer through RGB PC, set your PC computer timing mode to native resolution of panel. Please refer to the PC or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product. TO USE THE MENUS TO USE THE MENUS 1. Press the MENU button to display the main menu 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu. 4. Press the ENTER button to enable/disable the function. 5. Press the MENU or EXIT button to exit the menu. Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Setup menu, Video menu, Audio menu and Feature menu. However, some function items in the menus may only be enabled in the particular source modes. SETUP MENU The Setup menu in TV mode shows as below. In others source modes, the Setup menu only shows Menu Language and Aspect Ratio items. 1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV). 2. DTV Signal: Show the intensity of the received DTV signal. 3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. In channel scan process, the OSD can display the number of channels which had been found. 4. Add on Ch search:Add channels which are new found. 5. Manual Channel Set: Show the channel setup table. User can choose to display the ATSC or NTSC TV channels and then edit (add/delete) the channel numbers. 30 6. Channel Labels: Show the NTSC / ATSC TV channel label menu for user modifying channel labels specifically. 7. Menu Language: Select the menu display language. (English / Espanol / Francais) 8. Aspect Ratio: Select the display aspect ratio. (Normal/Zoom/Wide/Cinema) 9. Favorite Channel Mode: When favorite channel mode on user can edit favorite channel table in favorite channel set option. VIDEO MENU The Video menu in most source modes shows as below. It provides several video adjustment items for user fine tuning the video display. Only in VGA source modes, the Video menu simply provides Contrast, Brightness, Back light and Settings (Preset) items. 1. Contrast: Video contrast adjustment, the tuning range is 0 ~ 100. 2. Brightness: Video brightness adjustment, the tuning range is 0 ~ 100. 3. Sharpness: Video sharpness adjustment, the tuning range is -50 ~ 50. 4. Color: Video color chroma adjustment, the tuning range is 0 ~ 100. 5. Tint: Video tint adjustment, the tuning range is R50 ~ G50. 6. BackLight: Backlight st...