valutazioni - 5, GPA: 4.2
(
)
)
|
Facilità d'uso
Press the button to turn the sound off. The sound returns if the button is pressed again. Zapping Press the buttons to scroll through the programmes stored in memory. Personal Adjustments Press the red button to call up your personal adjustments (See Picture Adjustments). Display Press the yellow button to display the programme number and stand–by time (if sleep timer command is activated). If the channel has been fine tuned, the symbol is also displayed. This information disappears automatically after a few seconds. Press the yellow button again to delete this information. Stand-by -Sleep Timer Press the button to switch the television set to stand–by mode. The Stand–by light turns red. The television set will automatically switch to Stand–by after a few minutes if there is no signal on the channel being watched. Child Lock You can prevent the use of your television set using the keypad. To do this, switch off the television by pressing and holding down the stand–by button of the remote control for more than 4 seconds. The TV set is also child locked: -after the sleep timer function -if it has been switched to stand–by or switched off when the sleep timer function has been programmed. The stand–by light flashes to indicate that the child lock is activated. The set can only be switched on again using the numerical keys of the remote control. SAFE USE OF EQUIPMENT SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the Operating Instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections. Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. Don’t continue to operate the equipment if you are in any doubt about it working normally or if it is damaged in any way-switch off, withdraw the mains plug and consult your dealer. Don’t remove any fixed cover as this may expose dangerous voltages. Don’t obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment. Don’t listen to headphones at high volume, as such use can permanently damage your hearing. Don’t use makeshift stands and NEVER fix legs with wood screws-to ensure complete safety always fit the manufacturer’s approved stand or legs, with the fixings provided, according to the instructions. Don’t allow electrical equipment to be exposed to rain or moisture. Above all NEVER let anyone especially children push anything into holes, slots or any other opening in the case, this could result in a fatal electric shock. NEVER guess or take chances with electrical equipment of any kind-it is better to be safe than sorry. WARNING: Do not use cleaning agents containing ethyl alcohol, such as methylated spirits. This equipment should be switched to standby when it is unattended for a few hours. This can be done using the remote control. However, for long periods of absence, switch off at the on/off switch on the front of the TV so that the red indicator light goes out. Make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people. PERITELEVISON (SCART) PIN CONNECTIONS PERITELEVISON (SCART) PIN CONNECTIONS VIDEO INPUTS Composite video or sync: Pin 20 (pin 17 return). RGB: Red Pin 15 (pin 13 return). Green Pin 11 (pin 9 return). Blue Pin 7 (pin 5 return). VIDEO OUTPUT Composite video: Pin 19 (pin 17 return). AUDIO INPUTS A: Pin 6 (pin 4 return). B: Pin 2 (pin 4 return). AUDIO OUTPUTS A: Pin 3 (pin 4 return). B: Pin 1 (pin 4 return). FAST BLANKING (INPUT) Pin 16, + 1 V to + 3 V for fast blanking switching, 75 W. NOTE: IfanunsynchronisedTVpictureresultsafter viewing an external source (with a fast blankingsignal)connectedtoAV,thisvoltage mustberemovedtoreturntoTVmode. SIGNAL SELECTION Facilities are provided for automatic switching when the equipment connected provides switching voltages as follows: Pin8:+9.5V to+12V Auto switching to auxiliary O/AUX channel. Pin 16: + 1 V. to + 3 V. Auto switching to RGB. SIGNAL LEVEL Composite video: 1 Vp -p " 3 dB (in/out) positive going, 75 W. Sync: 0.3 Vp -p -3 dB + 10 dB, negative going, 75 W. RGB (input): 0.7 Vp -p " 3 dB, positive going, 75 W. Audio (in/out): 0.5 V r.m.s. (nominal) Input impedance: . 10 kW. (20 Hz -20 kHz) Output impedance: 3 1 kW. (20 Hz -20 kHz) SCART socket connections 1 3 5 7 9 111315171921 2 4 6 8 10 12 14 16 18 20 The socket is shown as viewed from the rear of the TV. Thedescriptionsandcharacteristicsgivenhereareofinformativesignifianceonly,a...