valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
Keep these items away from young children ! I .Make sure these instructions are read and completely understood before attempting installation. If you a re unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced. 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. Mi' PyLE Honie INSTALLATION GUIDE Item No.:PSWLE59 • TV Size Range: 32" — 55" • Maximum Weight Capacity: 30kg/66lbs • Locking by locking bar on the bottom pyleaudio. com -^CAUTION - This product was designed to be installed on wood stud walls and solid concrete walls. Before in st ailing make sure the sup porting surface will support the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Hardware Kit: A-E ID Qty Description 1 1 Wall plate 2 1 Left bracket 3 1 Right bracket 4 1 Locking bar 5 1 Rotating rod A 4 M4x 1 2mm bolt B 4 M4x 1 6mm bolt ID Qty Description C 4 M5 x 16mm bolt D 4 M6x 16mm bolt E 4 M8x 1 6mm bolt F 4 Square washer G 4 Long bolt H 4 Wall anchor 1 4 Long bolt washer -7- Part 3-Mounting the flat panel screen Hook the top of brackets(2,3) onto the top flange of wall plate(l). Then swing the screen down. NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment. Use the Locking bar(4) to prevent theTVfrom being removed or accidentally knocked off of the wall pi ate. When the locking bar half insert es in to the wallplate.youcanusethe rotating rod (5) to make it fully inserted. Part I a-Wood Stud Mounting Use wall plate( I) as a template, make sure it is level, and mark four mounting holes along the center lines of the wood studs. Drill four 3/1 6" (5mm)dia. holes 2" (50mm) deep. Level wall plate(l) and attach to wall with four long bolts(G) and four washers(l). Tighten screws firmly. Do not overtighten. Wood stud 2"(50mm) N Z//////Z ////////