valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
The change from one display mode to another, press S3 button once. TO SET THE TIME AND CALENDAR 1. Press S3 button to select NORMAL TIME mode. 2. Press S1 button to toggle between NORMAL TIME mode and TIME 2 mode to set. 3. Press and hold S2 button for around 2 seconds, the second digits will blink. 4. Press S1 button to reset the second digits to 00. 5. Press S3 button once, the hour digits will blink. 6. Press S1 to set the hour digits. Holding down the button will speed up the process. 7. Press S3 button once, the minute digits will blink. 8. Press S1 button to set the minutes digits. 9. Follow the same pattern to set the TRIM day (of the week), year, month, date and hour format. 10.To set the hour format, press S1 button to toggle between 12-hour and 24-hour format. The P.M. indicator may be displayed to indicate the time period 12:00 A.M. – 11:59 P.M. in 12-hour format. 11.After finish making all the settings, press S2 button to confirm. NOTE: The chosen hour format will apply to both NORMAL TIME mode and TIME 2 mode. NOTE: In TIME 2 settings, only hours, minutes, day, year, month and date are open to setting. TO USE THE CHRONOGRAPH (STOP WATCH) 1. Press S3 button to select CHRONOGRAPH mode. 2. The chronograph will then be displayed in its current state – reset, running, or stopped. 3. To resume a counting, press S1 button to resume from where it left off. 4. To start a new counting, reset the chronograph to zero first. Press S1 button to stop counting, then press S2 button to reset counter to zero. For changing the chronograph display format: In CHRONOGRAPH mode, 1. Press S2 button to toggle between SPLIT format and LAP format. 2. If SPLIT format is selected, the split time (cumulative lap time) will be displayed. If LAP format is selected, the lap time (individual lap time) will be displayed. For the measurement of elapsed time: In CHRONOGRAPH mode, 1. Press S1 button to start counting. 2. To stop counting, press S2 button. Press S1 button to resume from where if left off. 3. To reset to zero, press S2 button to stop counting, then press S2 button again to reset the counter to zero. For the measurement of split time: In CHRONOGRAPH mode, 1. Press S1 button to start counting. 2. While the chronograph is running, press S1 button once to register a lap. 3. Depends on the chronograph display format selected, the cumulative lap time (if SPLIT format is selected) or the individual lap time of the previous lap (if LAP format is selected) will be displayed. After around 5 seconds, the currently accumulated time will be displayed. 4. Repeat the last step until all the laps have been registered. 5. To stop counting, press S2 button. Press S1 button to resume from where if left off. 6. To reset to zero, press S2 button to stop counting, then press S2 button again to reset the counter to zero. TO USE THE RECALL FUNCTION 1. Press S3 button to select RECALL mode. The lap record of the previous chronograph counting will be displayed. 2. Press S1 button to cycle the first nine to the last split/lap record. 3. Press S2 button to return to CHRONOGRAPH mode. NOTE: The lap record will be cleared when chronograph is reset. TO SET THE ALARM TIME 1. Press S3 button to select ALARM mode. 2. Press S2 button toggle between HOME ALARM (HOME) and TIME 2 ALARM (T2) to set. 3. Press and hold S2 button for around 2 seconds, the hour digits will blink. 4. Press S1 button to set the hour digits. Ho...
Questo manuale è adatto anche per i modelli :Misuratori di pressione - Bella FS80984 (37.19 kb)
Misuratori di pressione - Bella FS80982 (37.19 kb)