valutazioni - 4, GPA: 4
(
)
)
|
Facilità d'uso
B.) Attach the Front Support (#5) to the Main Seat Support (#3). Secure the first hole to the Main Seat Support with one M8 x 1 5/8” Carriage Bolt (#28), one O 5/8” Washer (#26), and one M8 Aircraft Nut (#24). DO NOT tighten the Nut and Bolt yet. C.) Attach one end of the Diagonal Support (#4) to the second hole on the Main Seat Support. Align the holes and secure them together with one M8 x 1 .” Carriage Bolt (#29), one O 5/8” Washer (#26), and one M8 Aircraft Nut (#24). Attach the other end of the Diagonal Support to the Front Support (#5). Secure it with one M8 x .” Hex Bolt (#30) and O 5/8” Washer (#26). D.) Securely tighten all Nuts and Bolts previously installed. DIAGRAM 2 5 STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#6) to the Front Support (#5). Secure it with one M10 x 2 3/8” Hex Bolt (#21), two O .” Washers (#31), and one M10 Aircraft Nut (#27). Do not over tighten the Bolt. Make sure the Leg Developer is able to swivel. B.) Insert two Foam Tubes (#13) halfway through the holes on the Leg Developer. Push four Foam Rolls (#12) onto the Tubes from both sides. C.) Place a Spring Clip (#39) onto the weight post on the Leg Developer. DIAGRAM 3 6 STEP 4 (See Diagram 4) A.) Attach the hole-side of the Backrest Supports (#7) onto both ends of the pivot on the Main Seat Support (#3). Place the other end rest against the Backrest Adjustment Bar (#11). B.) Place the Backrest Board (#8) onto the Backrest Supports. Secure it with four M6 x 1 5/8” Hex Bolts (#23) and O .” Washers (#25). C.) Place the Seat Pad (#9) onto the Main Seat Support. Secure it with four M6 x 5/8” Hex Bolts (#22) and O .” Washers (#25). DIAGRAM 4 7 STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#34) to the Arm Curl Stand (#42). Secure it with two M8 x .” Hex Bolts (#33) and O 5/8” Washers (#26). B.) Insert the Arm Curl Stand into the top opening on the Front Support and secure it with a Lock Knob (#32). DIAGRAM 5 8 STEP 6 (See Diagram 6) A.) Slide the 25lb (#36), 15lb (#37), and 10lb (#38) Weight Plates onto the Weight Bar (#35). Note: Plates must be installed in pairs, one on each side. B.) Attach two Spring Clips (#39) onto the Weight Bar. DIAGRAM 6 9 10 PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 2 3 4 6 7 8 9 11 12 13 14 16 17 18 19 21 22 23 24 26 27 28 29 31 32 33 34 36 37 38 39 41 42 Rear Upright Beam 2 Cross Brace 1 Main Seat Support 1 Diagonal Support 1 Front Support 1 Leg Developer 1 Backrest Support 2 Backrest Board 1 Seat 1 Bracket 3 Backrest Adjustment Bar 1 Foam Roll 4 Foam Tube 2 O .” Round End Cap 4 O 1” Round End Cap 7 Rubber Bumper 1 1 .” Square End Cap 2 M8 x 2 3/8” Hex Bolt 4 1” Square End Cap 4 M8 x 2 .”Hex Bolt 4 M10 x 2 3/8” Hex Bolt 1 M6 x 5/8” Hex Bolt 4 M6 x 1 5/8” Hex Bolt 4 M8 Aircraft Nut 10 O .” Washer 8 O 5/8” Washer 13 M10 Aircraft Nut 1 M8 x 1 5/8” Carriage Bolt 1 M8 x 1 .” Carriage Bolt 1 M8 x .” Hex Bolt 1 O .” Washer 2 Lock Knob 1 M8 x .” Hex Bolt 2 Arm Curl Pad 1 48” Weight Bar 1 25lb Weight Plate 2 15lb Weight Plate 2 10lb Weight Plate 2 Spring Clip 5 Sliding Sleeve 1 48” Curl Bar 1 Arm Curl Stand 1 11 IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Customer Service Department at 1-800-999-8899. All freights for products return to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX. IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you. This warranty gives you specific legal right. You may also have other rights which vary from s...