Life Fitness is not responsible for the installation of CATV service or components required for the delivery of CATV service. An external TV signal input via a 75-ohm coaxial cable must be present before TV setup can occur. The Engage Console that is serial coded “DLB” for U.S. markets is powered by two external power supplies: a 36-volt DC power supply and a 12-volt DC power supply. “DLB” coded units have a Digital TV Tuner (NTSC/ATSC/QAM). Note: The Engage Console that is serial coded “ANN &

Connect it to the wire tie coming from the bottom of the console mast. Pull the wire tie and wire harness up through the top of the console mast while simultaneously sliding the mast into the frame bracket. • Secure the mast to the frame using six lock washers (M8) and six bolts (M8xl5L). Tighten with the 5mm T-shaped wrench. Place the seventh bolt (M8xl5L) in the rear of the frame bracket and tighten until snug. • Slide the console mast boot down and set it in place on the side cover. • Remo

Align the TRANSFORMER LINE CORD with the CABLE TIE CLAMP leaving a small loop in the cord at the TRANSFORMER PLUG. Guide a REUSABLE CABLE TIE through the the CABLE TIE CLAMP and around the TRANSFORMER LINE CORD (Detail ‘C'). Tighten the CABLE TIE CLAMP around the TRANSFORMER LINE CORD. NOTE: DO NOT TRIM CABLE TIES Step 4 Apply the two reusable cable ties to combine the TRANSFORMER LINE CORD and the PC COMMUNICATIONS CABLE as shown in Figure A. Route the combined cables over the top of the fro

To change the default, press the UP or DOWN ARROW key for the desired value. Press ENTER to select the new value or setting. To exit Optional Settings, press the CLEAR key repeatedly until the MESSAGE CENTER displays “SELECT WORKOUT USING ARROW KEYS OR PRESS QUICK START”. USER LANGUAGE SELECT If enabled, this option allows users to select the language by which to interact with the unit during a workout. To use the option, enable User Language Select (see below). Begin pedalling. The console will

This visually stimulating display features CardioAdvisor™ and multiple feedback options. cs: 866.709.1750 800.709.1400 WlAiV ¥ I FITNESS

The 14 notch front/back striker plate is black and was implemented first quarter 2001. Notched striker plate to be installed on seat post such that it is on the same side as the lever handle. NOTE: The Seat Guide is welded to the frame. Shown separately for illustration purposes only. BILL OF MATERIALS Item No. Qty. Part Number Description 1 1 ST05-S0011-0000 Seat post assembly 2 1 0 K50- P0547-0000 Front striker p ate {14 notch) 3 1 0 K50- P0548-0000 Back striker plate 4 4 0017-00101

Plus, personal entertainment for each exercise station is proven to be significantly more popular than wall-mounted TVs*. And when it comes to personal entertainment, no one does it like Life Fitness. We combine the best in LCD technology with the legendary performance and durability of our cardio equipment to give users what they want — workouts that don’t feel like work. From the highly advanced E3 Integrated LCD™ with Touch Screen Technology to the LCD Entertainment System, only Life Fitness