|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
3. To install the I/O module, insert the I/O module into the
enclosure and push the I/O module handle up. Be sure the I/O
I/O Module
Kit contents
module is seated ful y, and the I/O module handle is in the
•
I/O module (2)
locked position.
Installation Instructions
•
Warranty documentation
for HP high-density disk enclosures
•
This document
Installation
The enclosure ships with two I/O modules, one for each storage
drawer. Installing additional I/O modules expands support from
single-domain to dual-domain.
CAUTION: If the I/O module is instal ed in an enclosure
for which it was not designed, the module will not function
properly. Read the labels on the I/O module and the
enclosure to confirm compatibility. For example, an I/O
module with a "6G IO module" label is supported for use
only in the 6G, D6000 disk enclosure; an I/O module with
no label is supported for use only in a 3G disk enclosure
such as the MDS600.
The installation installation is complete.
To instal the second I/O module in the other enclosure drawer, repeat
To install an I/O module:
the procedure.
1. Be sure the hard drive drawer is closed completely.
2. To remove the I/O blank, release the I/O blank handle, pul the
CAUTION: For best cooling practices, do not operate the
enclosure for extended periods with more than one
I/O blank handle down until it ejects the I/O blank, and then
component or blank removed. When removing an active
remove the I/O blank from the enclosure.
component, replace it with a blank.
Regulatory compliance
identification numbers
For the purpose of regulatory compliance certifications and
identification, this product has been assigned a unique regulatory
model number. The regulatory model number can be found on the
product nameplate label, along with all required approval markings
and information. When requesting compliance information for this
product, always refer to this regulatory model number. The regulatory
model number is not the marketing name or model number of the
product.
European Union regulatory notice
Products bearing the CE marking comply with the following EU
Directives:
© Copyright 2012 Hewlet -Packard Development Company, L.P.
•
Low Voltage Directive 2006/95/EC
The information contained herein is subject to change without notice. The only
•
EMC Directive 2004/108/EC
warranties for HP products and services are set forth in the express warranty
•
statements accompanying such products and services. Nothing herein should
Ecodesign Directive 2009/125/EC, where applicable
be construed as constituting an additional warranty. HP shall not be liable for
CE compliance of this product is valid if powered with the correct
technical or editorial errors or omissions contained herein.
CE-marked AC adapter provided by HP.
Bluetooth is a trademark owned by its proprietor and used by Hewlet -Packard
Company under license.
Compliance with these directives implies conformity to applicable
harmonized European standards (European Norms) that are listed in
the EU Declaration of Conformity issued by HP for this product or
Part Number: 536582-002
product family and available (in English only) either within the product
September 2012
*536582-002*
documentation or at the following HP website
Edition: 2
536582-002
(http://www.hp.eu/certificates) (type the product number in the
search field).
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle (162.1 kb)
dati dispositivi di elaborazione - HP D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle (162.1 kb)
dati dispositivi di elaborazione - HP D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle (162.1 kb)
dati dispositivi di elaborazione - HP D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle (162.1 kb)