valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
console. If the node remains down and the node hosting the active management console also
goes down, the cluster configuration data may become inconsistent, depending on the order in
which the nodes are rebooted.
•
When the active management console is moved to maintenance mode, a passive management
console will transition to active mode. Be sure that this transition is complete before you move the
previously active management console from maintenance mode to passive mode. (Use the
ibrix_fm -i command to check the mode of each management console.) If the passive
management console has not yet assumed active mode, the management console being moved
from maintenance to passive mode will become active again.
CIFS
•
CIFS and X9000 Windows clients cannot be used together because of incompatible AD user to
UID mapping. You can use either CIFS or X9000 Windows clients, but not both at the same time.
•
Occasionally a share cannot be mounted using the DNS name. The workaround is to use the IP
address instead.
•
The X9000 CIFS server does not support connections from Linux SMB clients. The workaround is
to use NFS for Linux.
•
Alternate Data Streams (ADS) are not supported. When a file with an ADS is moved or copied
to the CIFS Server, X9000 Software moves/copies the file, but the attached ADS is not copied.
Attempts to create an ADS or a filename containing a colon (:) will be failed by the CIFS Server.
Some older versions of the CIFS Server allowed these ADS files to be saved as separate files with
a colon (:) in their names, such as testfile.htm:Zone.Identifier or
Thumbs.db:encryptable:$DATA. These ADS files are no longer attached to their original
files and can be safely removed if they are not needed. Because the colon (:) is now illegal in a
filename, any ADS files from old CIFS Server versions must be removed from the Linux command
prompt instead of over a CIFS share. (Attempting to delete them using CIFS will fail because of
the illegal filename.)
•
When the Microsoft Windows Share Management interface is used to add a CIFS share, the
share path must include the X9000 file system name. The Browse button on the MMC cannot be
used to locate the file system. Instead, enter the entire path, such as C:\data\.
•
The X9000 management console GUI and CLI allow only X9000 file systems and directories to
be exported as CIFS shares. However, the Microsoft Windows Share Management interface
allows you to create a CIFS share that is not on an X9000 file system. Although the share will be
available from the file serving node to which Windows Share Management was connected, it
will not be propagated to the other file serving nodes in the cluster.
•
The ibrix_localusers -i
includes commas. To enter commas in the user information, use the management console GUI
instead of the CLI.
•
When you use the Windows security tab to add local users or groups to a security ACL on a CIFS
file (for either file or share-level permissions), you typically specify the user to add as either a
DOMAIN\username or a MACHINE\username. On X9000 systems, local users are displayed
as LOCAL\username, and it may seem like you should specify LOCAL\username in the Add
dialog box in Windows. However, in this case, the Windows client cannot interpret LOCAL.
Instead, specify the machine name of the server. For example, to add LOCAL\user1 to an ACL
on a CIFS file shared out by serverX, specify serverX\user1 in the Add dialog box on the
security tab. If you later use the Windows security tab to look at this ACL, the server name will
have been replaced by LOCAL (the CIFS server performs this remapping to ensure that local users
Workarounds
13
...
dati dispositivi di elaborazione - HP IBRIX X9320 10GbE Performance Block (370.75 kb)
dati dispositivi di elaborazione - HP IBRIX X9320 IB Performance Block (370.75 kb)
dati dispositivi di elaborazione - HP StoreAll 8800 Storage Node (370.75 kb)
dati dispositivi di elaborazione - HP StoreAll 9320 1GbE Storage Node Pair (370.75 kb)