valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
ESL
hp
E-Series
Robotics
StorageWorks
Controller Card
(e1200-160)
Caution: Parts can be damaged by
Note: This part is not hot-pluggable.
electrostatic discharge. Keep parts in their
It is necessary to power down the library
containers until needed. Ensure you are
to replace this part.
properly grounded when touching static-
sensitive components.
1
2
ESL
E-series
e1200-160
hp
Network Storage
Power off the library.
StorageWorks
Controller
Note: This part is not hot-pluggable.
It is necessary to power down the library
to replace this part.
Caution: Parts can be damaged by
a. Use your backup software to empty the picker
electrostatic discharge. Keep parts in their
containers until needed. Ensure you are
properly grounded when touching static-
sensitive components.
or to verify that the picker is empty.
2
Power down the library.
a. Place the library off-line by pressing the
1
Standby button on the library's front panel.
The library robotics completes any current
commands and then stops.
b. Place the library off-line by pressing the
E
SL
E
-
s
eries
e
1200-160
b. Verify that the front panel display indicates
N
etwork Storage
h
p
C
ontrol er
N
ote: This part is not hot-pluggable.
I
t
is necessary to power down the library
S
t
orageWorks
t
o
replace this part.
“System Off-line”.
C
aution: Parts can be damaged by
e
l
ectrostatic discharge. Keep parts in their
containers until needed. Ensure you are
c. Verify that the picker is empty. If there is a
p
r
operly grounded when touching static-
2
s
e
nsitive components.
P
o
wer down the library.
a. Place the library off-line by pressing the
S
t
andby button on the library's front panel.
T
he library robotics completes any current
tape cartridge in the picker, perform a Move
c
o
mmands and then stops.
b
.
Verify that the front panel display indicates
“
S
ystem Off-line”.
1
c
.
Verify that the picker is empty. If there is a
t
a
pe cartridge in the picker, perform a Move
c
ommand to place the cartridge in an
command to place the cartridge in an
a
v
ailable slot. [Content needed.]
Standby button on the library's front panel.
d
.
Press and hold the power button located on
t
h
e front of the library behind the laptop tray
u
ntil the front panel goes blank.
available slot. [Content needed.]
4
I
n
s
pect the contents of the kit.
d. Press and hold the power button located on
3
the front of the library behind the laptop tray
F
l
i
p the two breaker switches off at the power
d
istribution unit.
until the front panel goes blank.
O
pen the back door of the library.
c. Verify that the front panel display indicates
Inspect the contents of the kit.
4
3
“System Off-line”.
d. Press and hold the power button, located on
Flip the two breaker switches off at the power
distribution unit.
the front of the library behind the laptop tray,
Open the back door of the library.
until the front panel goes blank.
Inspect the contents of the kit.
3
4
Flip the two breaker switches off (to the left) at the
Open the back door of the library.
power distribution unit.
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP ESL 712e Ultrium Tape Library (557.8 kb)
dati dispositivi di elaborazione - HP StorageWorks ESL 286e 286 Slot SDLT Library (557.8 kb)
dati dispositivi di elaborazione - HP StorageWorks ESL 286e SDLT Tape Library (557.8 kb)
dati dispositivi di elaborazione - HP StorageWorks ESL 322e 322 Slot Ultrium Library (557.8 kb)