valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
9.
Install the memory module:
12. Reinstall the storage system into the rack and
a.
Align the notch on the bottom edge of the
reconnect the cables.
memory module with the keyed surface of
a.
Replace the storage system on the rack rails
the DIMM slot.
and reinsert into the rack.
b.
Fully press the memory module into the slot
until the holding clips snap back in place.
WARNING!
To reduce the risk of
personal injury or equipment damage,
be sure that the rack is adequately
stabilized before replacing a
component from the rack.
b.
Tighten the front panel thumbscrews.
c.
Reconnect all peripheral cables and power
cords.
13. Power on the storage system.
Workaround (Optional)
If the affected P4300 G2 or P4500 G2 storage system
cannot have system software or memory upgraded at
CAUTION:
The DIMM slots are structured
this time, the following actions may reduce symptoms
to ensure proper installation. If you insert
until final resolution:
a DIMM but it does not fit easily into the
•
Reduce the I/O load to the storage system.
slot, you may have inserted it incorrectly.
•
Reclaim space on the storage system where
Reverse the orientation of the DIMM and
possible.
insert it again.
•
Disconnect non-essential servers from the storage
10. Gently place the air baffle back on the system
system.
board.
11. Reinstall the top cover:
Safely shutting down a management group
a.
Align the top cover to the chassis and then
1.
Disconnect any hosts or servers that are accessing
slide it towards the front panel to position it
volumes in the management group.
into place (1).
2.
Wait for any restriping of volumes or snapshots
b.
Once the cover is attached to the chassis,
to complete.
tighten the screw on the top cover with a T-10
3.
Stop managers on storage systems that you plan
wrench (2).
to remove from the management group. You may
want to add a FOM or start a Virtual Manager
on a different storage system to maintain quorum
and the best fault tolerance. See the section
“Stopping Managers” in the HP StoreVirtual
Storage User Guide.
4.
Log in to the management group to shut down.
5.
Click Management Group Tasks on the Details
tab, and select Shut Down Management Group.
6.
Click Shut Down Group.
After you click Shut Down Group, a confirmation
window opens, listing volumes that are still
connected and that will become unavailable if
you continue shutting down the management
group. If this window opens, do the following:
a. Stop server or host access to the volumes in
the list.
b. Click Shut Down Group.
Page 3
... Questo manuale è adatto anche per i modelli :
dati dispositivi di elaborazione - HP StoreVirtual 4130 600GB SAS Storage (305.47 kb)
dati dispositivi di elaborazione - HP StoreVirtual 4330 1TB MDL China SAS Storage (305.47 kb)
dati dispositivi di elaborazione - HP StoreVirtual 4330 1TB MDL SAS Storage/S-Buy (305.47 kb)
dati dispositivi di elaborazione - HP StoreVirtual 4330 450GB China SAS Storage (305.47 kb)