valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
For a complete list, see the “Tone List” on page A-1. 2Press the TONE button. 3Use the number buttons to input the three-digit tone number of the tone you want to select. Example: To select “049 ACOUSTIC BASS”, input 0, 4 and then 9. NOTE • Always input all three digits for the tone number, including leading zeros (if any). If you input one or two digits and stop, the display will automatically clear your input after a few seconds. • You can also increment the displayed tone number by pressing [+] and decrement it by pressing [–]. • When one of the drum sets is selected (tone numbers 256 through 263), each keyboard key is assigned a different percussion sound. See page A-4 for details. Polyphony The term polyphony refers to the maximum number of notes you can play at the same time. The keyboard has 32-note polyphony, which includes the notes you play as well as the rhythms and auto-accompaniment patterns that are played by the keyboard. This means that when a rhythm or auto- accompaniment pattern is being played by the keyboard, the number of notes (polyphony) available for keyboard play is reduced. Also note that some of the tones offer only 16-note polyphony. • When rhythm or auto accompaniment is playing, the number of sounds simultaneously played is reduced. Ac o . B sa s Indicator appears MIC VOLUME Number buttonsKEY LIGHT POWER/MODE [+] / [–] MAIN VOLUME TONEREVERB/CHORUS 663A-E-018A Basic Operations Using Tone Effects Reverb: Makes your notes resonate Chorus: Adds more breadth to your notes 1 Press the REVERB/CHORUS button to cycle through the effect settings as shown below. • You can find out the current effect setting by looking at the REVERB and CHORUS indicators. On On On Off Reverb on Chorus on Both on Both off 2 After turning on the effect you want, use the number buttons or the [+]/[–] buttons to select the effect type you want. • Note that you need to select an effect type with the number buttons or the [+]/[–] buttons within a few seconds after turning on an effect. If you don’t, the display will exit the setting screen. Effect List Reverb 0: Room 1 1: Room 2 2: Hall 1 3: Hall 2 Chorus 0: Chorus 1 1: Chorus 2 2: Chorus 3 3: Chorus 4 Turning the Key Light System On and Off Use the following procedure when you want to turn the key light system on or off. T o turn the key light system on and off 1 Press the KEY LIGHT button to toggle the key light system on and off. • The KEY LIGHT indicator disappears when the key light system is turned off. NOTE • The key light system is turned on automatically whenever you turn on keyboard power. Using the Microphone Jack Connecting a commercially available microphone to the MIC IN jack makes it possible to sing along with the keyboard’s built-in tunes or with SMF playback. When connecting a microphone, be sure to first adjust the MIC VOLUME to a relatively low setting, and then adjust to the level you want after connecting. 1 Set the MIC VOLUME slider setting so it is on the “MIN” side. 2 Turn on the microphone’s on/off switch. 3 Use the MIC VOLUME slider to adjust microphone volume to the level you want. [Rear Panel] MIC VOLUME slider Microphone Microphone on/off switch IMPORTANT! • Be sure to use the microphone’s on/off switch to turn off the microphone and to disconnect the microphone from the keyboard whenever you are not using it. Recommended Microphone Type • Dynamic microphone (standard plug) IMPORTANT! • Be sure to disconnect the microphone from the keyboard whenever you are not using it. Howling (Feedback Noise) Any of the following conditions can cause howling (feedback noise). • Covering the head of the microphone with your hand • Positioning the microphone too near to a speaker Should howling occur, try grasping the microphone further away from the head, and move away from any nearby speaker. Static Noise Fluorescent lighting can cause static noise in the microphone signal. When this happens, move away from the lighting you suspect may be causing the static. 663A-E-019A Playing a Built-in Tune E-18 Your keyboard comes with a total of built-in 100 tunes. You can play back built-in tunes for your own listening pleasure, or you can use them for practice and even sing-along. Built- in tunes are divided between the two groups described below. • Song Bank Group: 65 tunes The tunes in this group are Auto Accompaniment tunes. • Piano Bank Group: 35 tunes The piano tunes in this group are subdivided between 10 etudes and 25 concert pieces. In addition to the built-in tunes, you can also play back the tunes you download over the Internet (page E-35). To play back a Song Bank tune PREPARATION • Adjust the main volume (page E-16). 1Find the tune you want to play in the SONG BANK List, and note its number. • See page A-7 for the SONG BANK List. 2Press the SONG BANK button to enter the Song Bank Mode. 3Use the number buttons to input the tune’s two- digit number. Example: To select “54 ALOHA OE”, input 5 and then 4. NOTE • Tune Number 00 is the initial defaul...
Questo manuale è adatto anche per i modelli :Strumenti Musicali - LK-200S (2.46 mb)