valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
Use the iron only for its intended use. 2. Check that your mains voltage corresponds to that stated on the appliance. 3. To protect against electrical shock do NOT immerse cord, plugs, or iron in water or other liquid. 4. The temperature dial and steam knob always be turned to 0/MIN before plugging or unplugging from the outlet. Never yank the cord to disconnect form the outlet; instead, grasp the plug and pull to disconnect. 5. Unwind the power cord completely before using. 6. Do not allow the cord to touch the hot surfaces. Let the iron cool down completely before putting away. Rewind the cord completely when storing. 7. Always disconnect the iron from the electrical outlet when filling with water or emptying and when not in use. 8. Do not operate the iron with a damaged cord or plug or after the appliance has been dropped or damaged in any manner. To avoid the risk of electric shock, do not disassemble the iron, take it to a qualified serviceman for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used. 9. Close supervision is necessary when the appliance is used by or near children. Children should NOT play with this appliance. This appliance is not intended for use by persons (including children) 2 DA31066 / 31067 -091112 • with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 10. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a steam iron upside down – there may be hot water in the water tank. 11. If the iron is not operating normally, disconnect from the power supply and have the iron serviced by an authorized service center. 12. Deposit or Mineral in tap water will generate limescale and eventually block the steam holes, therefore it is advisable to use distilled water. 13. When placing the iron on a stand, ensure that the surface on which the stand is placed is stable. 14. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. SPECIAL INSTRUCTIONS • To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. • If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange the cord so that it cannot be pulled or tripped over. SAVE THESE INSTRUCTIONS POLARIZED PLUG INSTRUCTIONS This appliances is equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way. 3 DA31066 / 31067 -091112 Assembly page 3/16 • PART DESCRIPTION 1. Spray nozzle 2. Lid of the filling opening 3. Burst of steam button 4. Steam regulator 5. Spray button 6. Temperature indicator 7. Temperature dial 8. Self-clean button 9. Water tank 10. Cord Rewinding Button 4 DA31066 / 31067 -091112 Assembly page 4/16 • CAUTION BEFORE FIRST USE • The iron has been greased, and as a result, the iron may slightly smoke when switched on for the first time. After a short while, this will cease. • Before using for the first time, remove any sticker or protective foil from the soleplate. Clean the soleplate with a soft cloth. • Keep the soleplate smooth: avoid hard contact with metal objects (such as clothes rack, button and slide fastener). FILLING THE WATER TANK • Use preferably demineralized water. • Make sure the iron is unplugged from the outlet • Turn the temperature dial to "MIN" and the variable steam dial to the "0" setting. • To fill the water tank, open the lid of the filling opening and pour water through the fill opening, the iron put at an angle of 45°, using the beaker. Never exceed the MAX mark indicated in on the appliance. • When ironing, unplug the appliance before refilling. Fill the water tank by holding the appliance in 45° angle position without putting down the hot soleplate, unless you have a heat-resistant base. TEMPERATURE SETTINGS • You can choose the temperature setting in function of the material of cloth to iron. • In order to turn the iron to the desired temperature, please turn the temperature knob clockwise into the required position (see table below). If you have a doubt, take a look at the garment’s label. 5 DA31066 / 31067 -091112 Assembly page 5/16 6 DA31066 / 31067 - 091112 Assembly page 6/16 Caution: Please note that on the garment label means that this article m shall not be ironed. Instructions on Label Type of Fabric Thermostat dial Nylon Silk Wool Cotton Linen MIN MAX AUTO SHUT-OFF FEATURE Your iron is equipped with an auto shut-off feature. This safety measure will shut the iron off when ...
Questo manuale è adatto anche per i modelli :Ferri - USK DA 31067 (836.09 kb)