valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
Plug the cord into a 120-Volt AC outlet. 3. Select the fabric setting you desire (Synthetic, Silk, Linen, Cotton or Wool). Allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface. 4. Allow the iron to heat for 2 minutes, and then turn the Steam Lever to the appropriate setting. IMPORTANT: When not ironing, always set the Steam Lever to (Dry) and the Fabric Select to OFF. USING THE IRON’S SPECIAL FEATURES SPRAY MIST® FEATURE is a powerful water spray mist that dampens the fabric to aid in removing wrinkles from heavy fabrics and for setting creases. To use the Spray Mist® Feature: Press the Spray Mist ® button firmly. SHOT OF STEAM® FEATURE provides an extra burst of steam for deep penetration of stubborn wrinkles. You can use this feature while Dry or Steam ironing. The water reservoir must be approximately 1/4 full of water. To use the Shot of Steam® Feature: Place the iron on top of the wrinkle and press the SHOT OF STEAM® button each time you would like an extra burst of steam. The SHOT OF STEAM® feature may be used continuously with just a short pause between shots. VERTICAL STEAM (select models only) allows your iron to function as a garment steamer. Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. To use Vertical Steam: 1. Make sure that the iron has heated up (2 minutes). 2. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam. 3. With your other hand, pull the fabric tight. 4. Press the SHOT OF STEAM® button in approximately 3-second intervals as you move the iron across the wrinkled area. WARNING: To prevent the risk of burns, keep your hand away from the area being steamed. WARNING: DO NOT steam garments while wearing them; this may result in injuries. 30 MINUTE TIMED AUTO-OFF When the iron is plugged in, the Auto-Off activates automatically after 30 minutes. The Auto-Off will activate in any position after the 30 minutes. Once the Auto-Off activates, the power indicator light will turn off and the iron stops heating. To restart the iron: Press the Restart Button (Power Indicator Light). If you do NOT want to iron any longer, unplug the iron. Then move the Variable Steam Lever to (Dry) and the Fabric Select to Off. WARNING: The Auto-Off is a safety feature and is not a recommended means for turning your iron off. See “Caring for Your Iron After Use.” STORAGE STRIP® INDICATOR (select models only) is an easy way to see when the iron is cool enough to store. To use the Storage Strip® Indicator: Turn iron on. In approximately 2 minutes, the Storage Strip® Indicator will turn from black to red, indicating that the iron is too hot to store. When the iron is turned off, it will take the iron approximately 30-40 minutes for the Storage Strip® Indicator to turn from red to black, indicating that the iron is cool en...
Questo manuale è adatto anche per i modelli :Ferri - 121998 (583.6 kb)
Ferri - 3017 (583.6 kb)
Ferri - 3026 (583.6 kb)