valutazioni - 1, GPA: 4 ( )

Produttore : Philips File Size : 427.43 kb File Nome : Lingua di insegnamento:

Star t ironing the ar ticles that require the lowest ironing temperature, such as those made of synthetic fibres. 3 Put the mains plug in an earthed wall socket. The amber temperature light goes on (Fig. 6). , 4 When the temperature light goes out, wait a while before you start ironing. The temperature light goes on from time to time during ironing. Using the appliance Note:The iron may give off some smoke when you use it for the first time.This stops after a short while. steam ironing Make sure that there is enough water in the water tank. Set the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). Set the appropriate steam setting. Make sure that the steam setting is suitable for the set ironing temperature: (Fig. 7) 1 2 3 -1 - 2 for moderate steam (temperature settings 2 to 3) -3 - 4 for maximum steam (temperature settings 3 to MAX) Note:The iron starts to produce steam as soon as it has reached the set temperature. Note: If the selected ironing temperature is too low (MIN to 2), water may drip from the soleplate (see chapter ‘Features’, section ‘Drip stop’). Ironing without steam 1 2 Set the steam control to position 0 (= no steam) (Fig. 3). Set the recommended ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature’). Features spray function You can use the spray function at any temperature to moisten the ar ticle to be ironed.This helps remove stubborn creases. 1 2 Make sure that there is enough water in the water tank. Press the spray button several times to moisten the article to be ironed (Fig. 8). Steam boost A powerful steam boost helps to remove ver y stubborn creases. The steam boost function can only be used at temperature settings between 2 and MAX. 1 Press and release the steam boost button (Fig. 9). Concentrated steam boost from the special Steam Tip (specific types only) The concentrated steam boost from the long vents in the Steam Tip enhances the distribution of steam into every par t of your garment.The concentrated steam boost function can only be used at temperature settings between 2 and MAX. 1 Press and release the steam boost button (Fig. 10). Vertical steam boost You can also use the steam boost function when you hold the iron in ver tical position. This is useful for removing creases from hanging clothes, cur tains etc. 1 Hold the iron in vertical position and press and release the steam boost button (Fig. 11). Never direct the steam at people. Drip stop (specific types only) This iron is equipped with a drip-stop function: the iron automatically stops producing steam when the temperature is too low, to prevent water from dripping out of the soleplate. When this happens you may hear a sound. Automatic shut-off function (specific types only) The automatic shut-off function automatically switches off the iron if it has not been moved for a while. The red auto-off indication of the temperature light flashes to indicate that the , iron has bee...

Scarica la tua

Per scaricare, digitare 2 cifre :