valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
IRONING WITHOUT STEAM 1. Begin ironing but without pressing the steam release button (11). VERTICAL STEAM (C) 1. Set the temperature control to the «•••» or «max» position. 2. You can steam iron curtains and hanging garments (jackets, suits, coats...) by placing the iron in a vertical position and pressing the steam release button (11). CLEANING & MAINTENANCE 1. After ironing, pull out the plug and allow the appliance to cool down before cleaning. 2. Wipe the housing, handle and iron body with a damp cloth. 3. If the soleplate is soiled with dirt or scale, clean it with a damp cloth. 4. Never use abrasive products or solvents. Important: • Always unplug the appliance from the mains supply before carrying out any cleaning or maintenance operation on it. STORING THE APPLIANCE (D) 1. Always allow the appliance to cool down before storing it. 2. Set the main power to the «0» position and disconnect the mains cable. 3. Place the iron on the iron pad, standing on the soleplate. 4. Empty the water tank and store the mains cable on the cord rewind facility. Tidy the steam hose on the handle of the iron using the cord clip provided (14). Do not wrap the cords too tight. TROUBLE SHOOTING Problem Possible causes Solution The steam generator • There is a connection problem. • Check the mains cable, the plug and the does not come on. • The main power button is not switched on. socket. • Set the main power (6) button to the «I» position. The iron does not • The main power button is not switched • Set the main power (6) button to the «I» heat up. on. • The temperature control knob is set tothe «min» position. position. • Set the temperature control knob (10) tothe desired position. The iron begins to smoke when switched on. • During first use: Certain components onthe appliance have been lightly greased at the factory and may produce a little smoke when initially heated. • During later use: the soleplate may besoiled. • This is completely normal and will stop after a short while. • Clean the soleplate according to the cleaning instructions in this manual. Water flows through the holes on the sole plate. • The steam function is being used beforeit has reached temperature. • The water is condensing inside the pipes because steam is being used for the first time or has not been used for a long time. • Reduce the steam flow when ironing atlow temperatures (Variable steam control (4)). • Point the iron away from the ironing areaand press the steam release button (11) until steam is produced. Dirt comes out • There is a build-up of scale • Use tap water mixed 50% with distilled through the sole plate. or minerals in the steam tank. • Chemical products or additives have been used. or demineralised water. If the tap water in your district is very hard, mix tap water with distilled water 1:2. • Clean the sole plate with a damp cloth. • Never add products to the boiler water. The iron does not • The boiler is not switched on or the • Set the main power (6) button to the ...
Questo manuale è adatto anche per i modelli :Ferri - PL1390/02 (807.81 kb)
Ferri - PL1395/01 (807.81 kb)
Ferri - PL1395/02 (807.81 kb)