valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Important warnings Do not allow the power cord to come into contact with the soleplate when it is hot. Store the iron in upright position. Do not use descaling agents (unless they have been advised by Bosch), they can damage the appliance. Never use sharp objects or abrasive products to clean the soleplate or any other part of the appliance. To keep the soleplate in good condition, do not allow it to come into contact with metal objects. Do not use scourers or chemical products to clean the soleplate. Before using the iron for the first time With the iron unplugged, fill in the tank of the iron with tap water and set the temperature control dial to “max” Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light switches off), start steaming by setting the steam regulator to the maximum steam setting and by repeatedly pressing the button . When using the steam function for the first time, do not apply it on the laundry, as there could still be dirt in the steam dispenser. When turned on for the first time, your new iron may smell and emit a little smoke and a few particles; this will stop after a few minutes. How to use the iron Check the recommended ironing temperature in the label on the garment. If you don’t know what kind or kinds of fabric a garment is made of, determine the right ironing temperature by ironing a part that will not be visible when you wear or use the garment. Start ironing the garments that require the lowest ironing temperature, such as those made of synthetic fibres. Silk, wool or synthetic materials: iron the reverse side of the fabric to prevent shiny patches. • Synthetics •• Silk – Wool ••• Cotton – Linen Filling the water tank Set the steam regulator to the position and unplug the iron from the mains! Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products, will make the guarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliance has been designed to use normal tap water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Never fill beyond the “max” water level mark. Getting ready (1) Remove any labels or protective coverings from the soleplate. Ironing without steam (2) Ironing with steam (3) Only when the temperature control dial is placed in the areas with the steam symbol. Spray (4) Do not use the Spray function with silk. en Thank you for buying the TDA46 steam iron from Bosch. This iron has been designed according to ecological criteria, related to the sustainable development; analyzing its whole lifecycle, from material selection to its later reusing or recycling; evaluating the improvement possibilities, from a technical, economical and environmental point of...
Questo manuale è adatto anche per i modelli :Ferri - TDA4610/02 (3.59 mb)
Ferri - TDA4610/03 (3.59 mb)
Ferri - TDA4610/04 (3.59 mb)
Ferri - TDA4610/05 (3.59 mb)