valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
• Do not allow the power cable to come into contact with the soleplate when it is hot. Description 1. Water tank 2 Removable iron pad 3 Steam hose storage fixing 4 Carrying handles 5 Mains cable storage compartment 6 Mains cable 7 Steam hose 8 “Energy Saving” button * 9 “Steam ready” pilot light 10 Variable steam control * 11 “Refill water tank” pilot light 12 Illuminated main power button (0/I) 13 Housing with internal steam generator 14 Temperature control knob 15 Steam release button 16 Steam release button “Ultimate Steam” * 17 Iron pilot light 18 Soleplate * Model dependent en en Preparations (A) 1. Remove any label or protective covering from the soleplate. 2. Place the appliance horizontally on a solid, stable surface. You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Fill the water tank, making sure not to pass the level mark. 4. Unwind the mains cable (6) fully and plug it into an earthed socket. 5. Set the main power button (12) to the “I” position. 6. The “Steam ready” indicator lamp (9) will light up after several minutes, indicating that the appliance is ready to use. The steam generator will take more time to reach “Steam ready” state only upon the initial heating up, or after performing the desscaling operation (Calc’n clean). When water is already present in the steam generator during regular use, heat up time to reach the operating temperature will be faster. 7. This appliance has a builtsin water level sensor. The “refill water tank” indicator (11) will light when the water tank is empty. Important: • Normal tap water can be used. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. You can inquire about the water hardness with your local water supplier. • The water tank can be filled at any time while using the appliance. • To avoid damage and/or contamination of the was ss ter tank and the boiler, do not put perfume, vinegar, starch, descaling agents, additives or any other type of chemical product into the water tank. Any damage caused by the use of the aforementioned products, will make the guarantee void. • The iron is not designed to rest on its heal. Please always position it horizontally on the iron pad (2). • The iron pad can be placed into the specially designed recess on the appliance or somewhere suitable alongside the ironing area. Never rest the iron on the appliance without the iron pad!. • During it first use the iron may produce certain vapours and odours, along with white particles on the soleplate, this is normal and it will stop after a few minutes • While the steam release button is pressed, the water tank may produce a pumping sound, this is normal, indicating that water is being pumped to the steam tank. Setting the temperature 1. Check the ironing instruction label on the garment to determine the correct ironing temperature. 2. Turn the temperature selector (14) to the required setting: • Synthetics •• Silk – Wool ••• Cotton – Linen 3. The indicator lamp (17) will remain lit while the iron is heating and go out as soon as the iron has reached the selected temperature. Tips: • Sort your garments out based on their cleaning symbol labels, always starting with ...
Questo manuale è adatto anche per i modelli :Ferri - TDS2010/02 (2.74 mb)
Ferri - TDS2020/01 (2.74 mb)
Ferri - TDS2020/02 (2.74 mb)
Ferri - TDS2020/03 (2.74 mb)